How to properly dilute shampoo for touchless car washing

Example: on contactless shampoo “REIN AGENT” worth 270 rubles. for a 1 liter canister. Note: buying shampoo in larger canisters is much more profitable!

In the instructions, the manufacturer indicates the proportions for dilution - 1:12.

At car washes they prefer to dilute shampoo in a canister. And only then pour the prepared solution into the foam kit. A concentration of 1:12 is ideal in most cases. To get it, take 1 part shampoo to 12 parts water. You get 1 part + 12 parts = 13 parts. Total, 13 liters of prepared solution.
Fill the foam kit with 1 liter of solution. Let's calculate how much solution we poured (270 rubles: 13 liters = 21 rubles). So, the finished solution in the foam kit for one refill cost us 21 rubles.
How many cars can we wash with one refill of the foam kit? Let's count for 3, although experienced car washers wash up to 5 cars. So, 21 rubles: 3 cars = 7 rubles. This is how much it will cost to wash 1 car with shampoo.

Thus, when purchasing REIN AGENT shampoo in liter canisters, the cost of shampoo consumption for 1 car will be more than 7 rubles.

Here is a calculation table for commercial washers for 20 liters of ready-made foam for 20-liter REIN AGENT canisters. A 20-liter canister costs 2,937 rubles, which means 1 liter costs 147 rubles. (2937:20).

Sum of parts	How much in ml. chemistry will go into a 20 liter canister.	Cost 20 l. canisters of ready-made solution	Cost of 1 liter in foam kit	Number of cars washed per 1 filling of foam kit	Cost of consumption per 1 car
1+12= 13	20l./13h.= 1540ml.	1.54 l. x 147 rub. = 226 rub.	226 rub./20l.= 11.3 rub.	3	11.3 rub./3m.= 3.77 rub.

Preparation and use of I Can car shampoo solution

The first use of any product should be done without undue haste. To begin with, you should familiarize yourself with the information indicated on the packaging, find out the recommended dosage of the concentrate and the rules for its safe use.

The instructions, written in detail on the packaging, allow you to understand how to properly dilute car shampoo and in what quantities it should be used to achieve a high-quality result. It is worth noting that the minimum recommended dosage is suitable for washing passenger cars with not very complex stains. When it comes to cleaning a very dirty car body or washing large-sized special equipment, it is better to double the amount of car shampoo.

So, having decided on the dosage of the concentrate, you need to properly prepare the solution. For this purpose, it is better to measure the required amount of shampoo using a measuring cup. We do not recommend pouring the product into the foam kit tank by eye, as this may negatively affect the quality of the wash.

Pour the required amount of shampoo into the foam kit tank and dilute with water. To obtain a homogeneous consistency, carefully stir the solution with a stick or plastic spoon. Immediately after this, the shampoo is immediately ready to use in a pressure washer.

If you do everything correctly, then when working, the car shampoo will produce a thick, persistent foam similar to large snow flakes. Such foam “lays down” evenly on all surfaces and does not flow down.

To effectively combat dirt deposits, it is better to leave the shampoo on the body of the vehicle for just a couple of minutes, then rinse it thoroughly with water.

Errors during use

The peculiarity of a touchless car wash is that the diluted detergent is enough to dissolve the dirt. It is also important to correctly calculate the concentration in order to completely wash off the solution at one time. If necessary, repeat the rinsing procedure.

a lack of concentrate will not remove build-up and complex stains and will leave a residue;
too much foam leaves marks with white streaks, which make it difficult to see on the glass and make it look sloppy;
Do not overexpose the foam layer;
unwashed and dried chemicals harden and then must be carefully removed; if you use scrapers, you can only scratch the paintwork.

It is better to rinse off the shampoo with a solution of cold wax after the main cleaning stage; it will polish the surface and smooth out any existing scratches, adding shine. It is also antistatic, preventing dust from sticking for a long time.

You should also pay attention to the composition of the water. It is better if it is cleaned with a reverse osmosis filter, this will prevent the formation of whitish sediment - limescale during drying. To avoid all the problems and difficulties with washing, it is better to take your car to a specialized car wash in a timely manner, where the entire process is programmed and there are no errors. It also significantly saves the time and effort of the car owner.

Important information about the rules for contactless washing

If this is your first time using a high pressure washer with I Can shampoo, then you should first of all become familiar with a few simple but very important rules:

Knowing how to properly dilute contactless shampoo and how to use it, you will always achieve high-quality results and carry out the washing procedure with minimal time. If you still have questions regarding the rules for using I Can products or you want to buy such car shampoos at an affordable price, then for this purpose, just contact the experts of our company today.

Look at our catalog of car shampoos and choose the products that suit you!

Source

Content

Today, high-pressure washers are found not only in car washes. Car owners also use them. To quickly and effectively remove dirt, you need auto chemicals. It is important to choose a high-quality composition in order to wash the body without damaging the paintwork and other elements. For example, rubber seals and wiper blades, radiator grilles, chrome parts, etc. suffer from aggressive alkaline compounds. It is also necessary to dilute the shampoo for contactless washing in the correct proportions. Use the tips from our article, and in just a couple of minutes your car will be sparkling clean!

YAKU2576

On a dirty car you just want to write: “Wash me!” - which is what many do. How to wash it? Water alone is not enough. And even if you pour car shampoo on your car and then wash off the foam, the dirt will still remain. You need to help with your hands. But washing with sponges, rags and brushes is fraught with microdamage to the paintwork due to the abrasive effect of dirt and sand particles.

Studying the label

Before you start washing, study the manufacturer's recommendations, which are indicated on the car shampoo label. It gives proportions for working with a foam generator and a foam kit. For example, consider the active foam Grass Active Foam Truck. A 23 kg canister is enough to wash 300 - 400 cars. The proportions for a foam generator will be from 1:50 to 1:100 - this is approximately 10 - 20 g per liter of water; for foam kit - from 1:3 to 1:9 or 100 - 250 g per liter of water. This product is two-component, so before diluting it you need to shake it so that the ingredients are mixed. If you have to wash a truck, then for the same volume of water you need 1.5 - 2 times more shampoo. Each manufacturer makes its own recommendations depending on the concentration of the composition.

Tip: usually the proportions for preparing foam for contactless washing are given in the range, for example, from 10 to 20 g. Choose the best option depending on the degree of contamination of the body. If there is a lot of stuck dirt, insects, or oil stains on it, you should not skimp on shampoo - dilute it in the maximum proportion.

Why Grass

It is worth using “Grass” shampoo for contactless vehicle washing for the following reasons:

Versatility. Car shampoo from is suitable for absolutely all types of cars, regardless of what parts are installed on them. Its chemical composition is selected so that none of its components can enter into chemical bonds with paint and varnish coatings, glass, rubber, metal and other materials that make up the external coating of the car. Therefore, Grass is relevant for any models and brands.
Reliability. No matter how difficult the stains on your vehicle may be, car shampoo from Grass will definitely cope with them. The chemical composition of this product allows for the removal of any, even the most complex, large and old stains.
Speed. Using car shampoo from, you can literally remove dust and dirt from your entire car in just a few minutes. This is very convenient, especially when the vehicle owner is in a hurry.
Thick and abundant foam. Grass car shampoo concentrate is capable of generating a huge amount of foam - only a small amount of powder (about 100 or 150 grams) should be enough to completely wash a passenger car.

Grass products

Adaptability to any water. It does not matter what the hardness of the water with which you mix the Grass car shampoo concentrate will be. Its softness or hardness will not in any way affect the performance of the product’s immediate functions (however, in some cases it may affect the amount of powder required for washing).
No streaks after use. Unlike most of its analogues, Grass car shampoo does not leave any traces on the surface after use. You will not see streaks or drips - only the smooth, eye-pleasing shine of your car.
Washability. In order for the foam of Grass shampoo to be completely eliminated, you do not need a large amount of water - it is instantly eliminated with a tight pressure, leaving nothing behind.
Safety. Shampoo for touchless washing from the Grass company is an environmentally friendly and environmentally friendly product. This is confirmed by multiple certificates and licenses. It is also absolutely harmless for humans and pets (if you avoid getting it on exposed skin).

Active foam Grass Active Foam Power 6kg

Specifications:

shampoo for contactless washing from can be used for 18 months. After this, the concentrate begins to gradually lose its beneficial qualities;
The storage conditions of this car shampoo for contactless washing do not imply non-standard rules: the product must be kept in a room with above-zero temperatures and normal humidity levels. In this case, if possible, you should avoid direct sunlight on the container with the product;
The product does not contain hazardous or toxic substances. The concentrate consists of purified water, sodium lauryl sulfoethoxylate, diethanolamides of coconut oil fatty acids, polishing agent, sodium chloride, perfume, preservatives and food coloring. The product does not pose a fire hazard and will not catch fire even if there is an open flame nearby;
In the vast majority of cases, shampoo for contactless car washing from the Grass company is sold in canisters of 5, 10 or 20 liters.

Car shampoos Grass

Washing the car

So, you have prepared a solution for applying foam. How to apply it? It is recommended to direct the nozzle towards the body, moving from top to bottom and making left/right movements. If you throw foam on top, it will slide down the body, and you may miss some areas.

Important to remember! In summer, before applying foam, it is recommended to cool the body by washing it with cold water. Otherwise, the shampoo will quickly dry out on hot metal and will be difficult to wash off. In winter, you should spray your car with warm water to remove ice.

Depending on what type of foam you use will determine its structure. This is usually a thick soap composition. High-foaming shampoos are sprayed onto the body with snow flakes. A sign that the solution has been prepared correctly is that the foam is held on the body and does not slide off. This is how the components act on dirt and separate it from the surface. After 2 minutes, the shampoo can be washed off with water - it’s better to start from the same area from which you applied the foam.

Tip: Hold the nozzle correctly to achieve an excellent cleaning effect without damaging the body. Maintain a distance of 20 - 40 cm to the surface of the car and an angle of 70 - 90°.

If you follow these simple tips, you will be able to handle the sink quickly and easily. And you don't have to rub anything! All that remains is to blot the body with a moisture-absorbing napkin.

Source

Storage nuances

It is not only errors in the concentration of a solution that can make it dangerous or useless. Another important parameter is to ensure proper preservation of both the product intended for dilution and the ready-to-use suspension. Let's look at some particularly important rules:

You should not prepare too large volumes of the finished mixture in advance; it is better to add it during the working day. Even well-filtered tap water contains a considerable amount of salts and the foamy substance always interacts with them. During long-term storage, all effective components are leveled due to the fight against pollutants inside the tank. Accordingly, the quality of the output drops significantly, which leads to the need to manually add a base. This increases consumption, so you can forget about saving.
If you keep the container with the concentrate open for a long time, chemical reactions with air will not take long to occur. The effect is similar to that described above.
The temperature indicator must remain within the limits proposed by the manufacturer.

Quite often, car wash owners are faced with the problem of insufficient cleaning. Many of them mistakenly place the blame on the equipment, being completely confident in their actions regarding the preparation of the washing base. Alas, no one is safe from following instructions incorrectly, but knowledge regarding structure, proper preparation and preservation will help minimize all risks, including negative reviews. It is noteworthy that the vast majority of brands producing auto chemicals today approach the development of their products with increased responsibility. Therefore, we remind you once again: following the instructions is the key to getting rid of numerous problems.

Source: leisuwash.ru

Car shampoos for manual and contactless washing

Content

Application benefits

Instructions

Review of manufacturers

Recommendations for selection

Cleanliness is the key to health, the same applies to a car; car shampoo will help us maintain it. The car must be kept clean, otherwise many troubles cannot be avoided, such as damage to the paintwork.

Car washing is a mandatory procedure for vehicle care.

Experts believe that a car needs to be washed at least once a week in the summer, and 2 times a month in the winter. You can wash it yourself or take the car to a specialized service point. There they will not only wash it, but also dry it, and if the car owner wishes, polish the car.

The modern automotive market offers a large selection of all kinds of automotive chemicals. Among all the variety, car shampoos are also offered.

There are several types of detergents:

Car shampoo for manual washing can be used both in car washes and when used independently. It is not so aggressive, so it does not wash away many stains properly. This is due to the fact that contact washing involves rubbing the product over the body and the use of more aggressive components can damage the coating. This type of shampoo is not dangerous to humans, but it is better to carry out the work with gloves.

Car shampoo for manual washing can be used both in car washes and for self-use

Car shampoo concentrate for contactless washing is able to remove more persistent stains. It is sprayed as foam under high pressure. Washing is much faster than manual washing and is more efficient. It is necessary to observe safety precautions when working with this product and use personal protective equipment. This type of shampoo is very aggressive.

Active foam: composition, features and advantages

Numerous analyzes aimed at studying the properties of contaminants that coat cars under standard circumstances have shown that they are based on fat. Accordingly, when washing, we will have to fight it first. At the same time, we must not forget about important tasks: preservation of paint coatings on parts and processing speed.

So, the structure of chemistry for a contactless car wash includes the following components:

Surfactants
- the base of the detergent, may include some types of salts, as well as sulfates or phosphates of higher fatty alcohols. Sometimes carboxylic acids are introduced. As effect enhancers, it is possible to add nonionic and anionic surfactants that help bind mud deposits and increase foaming.
Complexing agents
– polyaminocarboxylic acids – bind the contents of the mixture, simultaneously reducing water hardness and increasing foaminess.
Foaming agents
- alkyl sulfates, polyphosphates and other surfactants that improve the separation of constituent dirt products from paintwork due to the clear separation of liquid, solid and gaseous phases.
Regulators of acid-base environment
- the optimal ratio is pH 10–11. This indicator can be controlled by adding special buffer regulators.
Dispersants
are essential oils that prevent the process of aggregation of the constituent parts in the mixture.
Anti-corrosion materials
are certain types of wax that prevent the occurrence of rust in areas not protected by car varnish.
Dyes and fragrances
- give the product a good presentation and eliminate unpleasant odors that arise when mixing chemical elements.
Distilled water
is the base for auto chemicals; the volume can reach up to 70%.

The main difference between such reagents and classic shampoo intended for manual application is the principle of action. Conventional auto chemicals, which can be purchased in stores everywhere, soften and dissolve dirt particles to facilitate further physical removal. At the same time, the presence of soil, sand and other solid parts in the contamination turns washing into a serious problem - they act as coarse abrasives, causing minor damage to paintwork materials.

The types of products considered in our case act differently: after application, they eliminate adhesion between stains, stains and body surfaces. There is no need for physical impact, which means the risk of scratches is minimized.

The absence of an abrasive effect is a significant advantage, but not the only one. Many years of experience interacting with active chemicals at our car washes, as well as feedback from entrepreneurs with whom we have established partnerships, helped us identify a list of advantages. It includes the following:

the time of all car wash cycles is reduced to 10–15 minutes;
the absence of the need for mechanical processing allows for fully automated work;
the correct selection of components allows you to remove even old dirt, including oil stains, insect residues, elements of deicing agents;
the waste liquid is environmentally friendly, and within a short time it decomposes without violating environmental requirements.

Of course, it is impossible to do without shortcomings, but they are offset by an error-free approach to the preparation of foam concentrate. Errors in this task can increase the likelihood of damage to paintwork. This can be prevented by knowing about the nuances of diluting chemicals.

Application benefits

Car shampoos are specially designed to remove all possible contaminants that may appear during vehicle operation. In addition, they are harmless to paintwork.

Here are just some of the benefits:

Modern products cope so well with various contaminants that you can forget about those times when car owners used rags to wipe off unwashed stains from the car body. Times have changed. To make your car perfectly clean, you just need to apply a cleaning solution, wait a couple of minutes and rinse.

Modern products cope so well with various contaminants

Instructions

To decide on the choice of shampoo for contact or contactless washing, you need to understand what goals it has and what effect you want to achieve. Before purchasing, you should read the composition indicated on the package.

In the warm season, before applying detergent to the car, you should cool the hot body with a stream of water. This will prevent the solution from drying out quickly. In winter, the snow is first washed off and the ice is melted, and only after that the foam is applied.

In order to wash one car, you will need an average of 3-4 tablespoons of concentrated product. It must first be diluted in water. How to dilute car shampoo depends on the manufacturer and type of specific product. The result should be a large amount of foam, which, when washing the car, will cover its entire surface. For example, if a bottle of shampoo says that it needs to be diluted 1:4, then one part of the product needs to be diluted with four parts of water.

After applying diluted shampoo to the surface, wipe it with a soft cloth and rinse off the foam with water. For a better effect, after washing the car body can be coated with a polishing compound. It is not recommended to wash with a sponge. Its porous structure absorbs dirt particles, which act as an abrasive on the paintwork.

After applying diluted shampoo to the surface, wipe it with a soft cloth and rinse off the foam with water.

How to dilute the shampoo for touchless washing is also indicated by the manufacturer. It is imperative to follow the instructions, as this affects the quality of the wash. After the solution is prepared, it needs to be poured into a spray bottle and sprayed on the car. This should be done from the bottom up. The product should be washed off after one to two minutes. Exactly the same - from the thresholds to the roof. Recently, car washes have used special foam generators to prepare detergent. This saves a lot of time.

How to apply the solution

Active foam can be applied both to a dry surface and to a moistened (broken) surface of the car. If the body gets hot in the sun, be sure to cool it with water to prevent the cleaning solution from drying out quickly.

If the body has cooled down in the cold, you must first knock off the ice and snow, and then warm the body with a stream of water so that the cleaning solution does not freeze on the surface.

If the body is heavily dirty, you must first knock off the top layer of dirt with a jet of water under pressure.

It should be remembered that the layer of foam or emulsion should evenly cover the entire surface to be treated to avoid unwashed areas.

To obtain the best effect, we recommend applying foam or emulsion evenly with smooth movements in a horizontal plane, moving from bottom to top and treating each side of the car in turn (if you start applying from top to bottom, then dirty foam sliding down or emulsion flowing down can interfere with the uniform application of the working solution and the effect of application will be lower).

After applying the cleaning solution, you need to let it work for 1-2 minutes, not allowing it to dry out.

How to wash off the solution

The solution is washed off using a high-pressure apparatus. We recommend starting flushing from the side surfaces and then moving on to flushing the roof. In this case, it is necessary to move in a horizontal plane at a distance of 15-20 cm from the surface, moving a flat, wide stream of water from bottom to top.

After the composition is washed off from the surface, the car must be dried with a special moisture-absorbing cloth, as this will not only dry the car, but also eliminate the appearance of any foreign manifestations related to water quality.

To apply a detergent solution during contactless car washing, the following equipment is most often used: foam kit, foam generator, dosatron*.

Foam kit

Foam kit is an injection device that allows you to quickly apply a chemical in the form of a foam solution to external surfaces.

The foam kit consists of the following parts:

Gun (1) with external clutch.
Injector nozzle with internal coupling. Nozzle includes:
liter bottle for chemistry (2B);
adjusting screw (2B, regulates air supply);
sprayer (2G, changes the angle of the spray jet);
Lance with internal coupling and nozzle (3)

An injection nozzle with a plastic bottle is connected to the gun using a quick-release connection (bayonet mount - 1A), into which the active chemical concentrate is poured. After pressing the trigger of the gun, a stream of water from a high-pressure apparatus passes through the injector and, capturing chemicals from the bottle, forms a cleaning solution. The degree of dilution of the chemical is from undiluted shampoo to diluted with water in a ratio of 1 to 15. The choice of proportion depends on the viscosity of the car shampoo, the water pressure at the inlet and the characteristics of the specific foam kit. A mesh insert (foam tablet) at the outlet of the sprayer foams the solution.

The foam volume is adjusted by increasing or decreasing the amount of air using the adjusting screw. 1-2 minutes after applying the foam, a lance (jet nozzle) is attached to the gun using a bayonet, and the foam is washed off along with the dirt.

Working with foam kit:

Pour shampoo for contactless washing into the bottle, dilute with water in the proportion indicated on the label. The optimal concentration is selected at each car wash individually depending on the time of year, degree of contamination of the car, water quality, pressure of the high pressure sprayer, and requirements for the quality of washing.
Attach the bottle and gun to the injection nozzle.
Turn on the high-pressure apparatus and pull the gun trigger.

Foam generator

A foam generator is a mobile device operating under pressure, connected to a compressor and designed for creating and applying chemical solutions.

The foam generator consists of:

a chemical solution tank with a filler neck (funnel);
air pressure regulator in the cylinder;
regulator for supplying the finished solution (on some models);
regulator of air supply to the solution;
chemical solution supply hose;
spray gun;
emergency valve;
pressure gauge to control the pressure of the supplied air;
level tubes.

Compressed air from the compressor displaces the working solution from the tank. Through a special nozzle, the solution foams and is applied to the car in the form of foam. The structure of the foam depends on the concentration of the chemical solution and the settings of the foam generator. The volume of foam also depends on the shape of the nozzle used. A nozzle with a narrow hole delivers the solution in the form of an emulsion, while a nozzle with a wide hole delivers a solution in the form of foam.

Working with a foam generator:

Pour shampoo concentrate for contactless washing into the foam generator tank through a funnel according to the instructions. Lower the water supply hose to the bottom of the tank and pour water through the level tube. The optimal concentration is selected at each car wash individually depending on the time of year, degree of contamination of the car, water quality, pressure of the high pressure sprayer, and requirements for the quality of washing.
Apply compressed air by turning the tap. The operating pressure in the foam generator tank should be 6-8 atmospheres.
Press the trigger of the gun and spray the product evenly onto the body from bottom to top.
You can adjust the density of the foam and the flow rate of the cleaning solution using the air supply regulator to the finished solution, as well as by selecting the appropriate nozzle and solution concentration.

Dosatron

Dosatron* is an autonomous, energy-independent device that ensures mixing of water with detergent concentrate to obtain a working solution. In this case, mixing is carried out exactly in specified proportions.

main inlet for water (entering water forces the pump piston to move)
large piston (transmits the resulting force to a small, dosing piston)
small piston (doses and delivers chemicals)
tube for supplying auto chemical concentrate
pressure regulator
solution mixing chamber
output of the finished working solution

The dosatron works due to the water pressure in the water supply network, providing proportional continuous suction of the concentrated product, mixing it with water in a given ratio and directing the resulting solution. The dispenser automatically adjusts the proportionality depending on changes in water flow (for example, in the event of a decrease in pressure in the water supply network). When passing through the dosatron, water loses about 0.4 bar. The maximum permissible inlet water pressure is 6 bar. The presence of mechanical impurities in the water or the supply of hot water can lead to malfunctions in the operation of the dosatron and even to its complete destruction.

Review of manufacturers

The modern auto chemical market offers a huge variety of products designed for all types of manipulations performed on a car. To make the result pleasing, you need to choose proven products and reliable manufacturers. Here are some of them:

One of the leaders in the car care products market

You should not save on auto chemical products. Paintwork is a rather fragile substance, so you need to treat it with care. By purchasing licensed products from well-known and trusted manufacturers, you will protect your car from troubles and get the expected excellent results.

Shampoo for contactless washing ATAS Plak prof

Rules for preparing the squad

One of the main misconceptions inherent in beginners comes down to the banal statement: “more is better.” It’s not for nothing that auto chemical manufacturers place recommendations on the packaging of their products. A decrease in the required amount makes the concentrate ineffective, while an increase makes it dangerous for the paintwork. The proportions directly depend on the characteristics of the foam generator used. The level can vary from 10–20 to 150–300 grams per liter.

The mixing system for washing cars is a rather sensitive design, so the issue of creating a good mixture for equipment is also of considerable importance. The alkali contained in the structure can negatively affect the filter elements. In addition, the use of low-quality and poorly filtered water is guaranteed to lead to blockages, as well as the formation of sediment, which is not an easy task to get rid of.

Recommendations for selection

In order to choose a good car shampoo that will cope with its main functions, you need to adhere to the following rules:

Car shampoo with wax “Ultra”

Be sure to look at the bottle for instructions on how to dilute the car shampoo for touchless washing. Don't buy a large package right away. Try it and see the quality by purchasing a small one.

Source