How to clean a filter in an aquarium: rules and methods, disassembly instructions

A filter is a must-have accessory in any aquarium. It not only purifies the water from harmful substances and toxic waste from fish, but also saturates it with oxygen. But during operation, the device becomes clogged, its efficiency decreases and dangerous toxins are released into the water.

In order for the filter to work properly and perform all its functions fully, you need to clean it regularly. It is important to do this correctly, since bacteria live on the surface of the filter materials, which maintain the biobalance in the artificial reservoir.

With all the variety of models, both internal and external filters have approximately the same structure. Therefore, this instruction on how to clean the filter in an aquarium will be useful to any aquarist.

What determines the frequency of maintenance of an aquarium filter?

It is common for novice aquarists to make mistakes in their pond care schedule. Rare cleaning, as well as too frequent cleaning, is harmful to the aqua system and can cause problems. Factors influencing the frequency of aquarium maintenance:

Aquarium volume. Ponds that are too small need to be cleaned more often than large ones, because in large aquariums the aquatic system is more stable.
Number of living fish. The more inhabitants there are, the more often you will have to clean it. By adding more feed, waste increases.
Number of natural plants. Living plants serve as a biological filter for the aquatic system. They are involved in processing waste, absorbing harmful substances, and cleaning the reservoir.
Bacteria. This is the basis of biological filtration. They are engaged in primary waste processing. Their action affects the stability of the aquatic system.
Filtration. The filter is selected according to the volume of the aquarium. The installed mechanism must be able to cope with the volume of waste and create a sufficient level of water circulation. The frequency of treatment of the aquarium filter depends on how the filtration is performed.
Feeding. The reservoir is also polluted due to overfeeding of fish. Feeding is best done in moderation.
Failure to maintain the correct aquarium maintenance regime. Due to excessive lighting, walls and decorations become dirty, and problems with algae appear. Excessive application of fertilizers leads to this effect.

For continuous filtration, a constant flow of oxygen is required to the filter material. Interruptions in the supply of oxygen, which is dissolved in water, can occur due to two circumstances:

If the filter material is not cleaned from mechanical contamination in a timely manner. Excess dirt interferes with the flow of oxygen and saprophytes (plant organisms that feed on dead organic matter) do not decompose organic matter as they should.
Interruptions in the functioning of the aquarium filter. If there is no oxygen supply, beneficial bacteria will die off. Due to prolonged stoppages in the operation of the filter, colonies of microorganisms will die. Such a situation will lead to reverse processes in the filter, and the dead saprophytes will begin to release toxic substances into the water: hydrogen sulfide, methane, ammonia and carbon dioxide. If a filter that does not work for a long time is connected, streams of contaminants with an unpleasant odor will flow into the water, poisoning the inhabitants of the aquarium.

Types of filtering

Mechanical. Water passes through porous sponges and is cleared of suspended matter, feed residues and other large particles. To ensure that the quality of filtration does not decrease, the sponges must be washed and periodically replaced.
Biological. During the life of fish, ammonia and nitrates are released into the water, which can poison aquatic inhabitants. This type of filtration reduces the amount of such substances. The bacteria that live in the filter decompose them into safe components.
Chemical. Used for mass poisoning of fish in an aquarium - only after treatment. At such moments, activated carbon is used as a filter material, the particles of which retain harmful substances.

Signs of dirty filter elements

Filter models are different and devices for small aquariums need to be cleaned more often than those for large ones. When determining contamination, you need to take a closer look at the water flow from the device. If the flow becomes weaker, then this is a sign that flushing is required. If the water in the reservoir becomes cloudy, this also serves as a signal that the filter is dirty.

What to do with the inhabitants during this period?

Considering that the filter is removed from the aquarium for cleaning, this event will not disturb the inhabitants in any way. They can be left inside to avoid unnecessary stress.

Another aspect is that after a serious cleaning, the filter bacteria will take some time to master the filter medium and begin to work normally.

In order to facilitate and speed up this process, it is recommended to reduce the load on the filter. The easiest way is to slightly reduce the fish’s diet the day before cleaning the filter. Then - gradually return to your normal diet over 4-6 days.

How to properly clean filters?

It is important that these devices work efficiently, saturating the aquarium water with oxygen.

Despite the differences in brands and power, the filtration devices are similar. For this reason, both internal and external filters are cleaned according to the above example. There are two types of cleaning aquarium filters:

cleaning filter elements;
complete cleaning (filter elements and mechanical ones are cleaned).

Filter elements are cleaned regularly as they become dirty. Complete cleaning is recommended when microorganisms with other deposits interfere with the normal functioning of the device. Do not forget that sterile purity of filter materials is not necessary. Such actions will lead to the washing out of beneficial bacteria that perform biological purification of water and maintain the biobalance in the reservoir.

Water should flow evenly through the filter media. Water flows along the simplest path it finds. When using fillers in bags, you need to ensure their even distribution. To do this, just make sure that the bags fit snugly against the walls in the filter chamber.

The mistake some aquarists make is that they turn off the aerator filter at night. This threatens damage to the aquatic system. At night, the need for oxygen increases. This happens because it is not released from plants in dark conditions, but is absorbed by them.

There is a statement that the filter power per hour should be three times the volume of the aquarium. In this case, if the aquarium volume is 100 liters, you will need a filter device capable of providing a throughput of 300 liters per hour. These are average values, but in some situations limited or increased filtration is required.

If you use a filter more powerful than needed for the aquarium, this will negatively affect the plants, and for many of them, strong water pressure is only harmful.

In addition, an excess of oxygen during the day will not be beneficial for them, because they receive nutrition in the form of carbon dioxide dissolved in water.

What will you need?

When processing filter material, it is not recommended to use chemical detergents and soap. Residues from them are harmful to the inhabitants of the aquarium. When cleaning, you will not need to use any additional substances; rinsing with running water (but not hot) will suffice.

It’s just important not to get too carried away with the washing process; perfect sterility is not needed in this case.

We will need:

bucket;
rag;
pelvis;
cotton buds;
old toothbrush;
small package;
disposable filter material for replacement;
Activated carbon.

Preparation

The flushing process should begin between changes of water in the reservoir. It is important to maintain biobalance in the aquarium. The filter is removed from the aquarium. Then disassemble the device. To complete the process as quickly as possible, it is better to prepare the necessary things in advance.

Compliance with safety regulations

In addition to harmful bacteria, the filter material also contains beneficial organisms. It is better to plan flushing not during a period of dramatic changes (change of water, introduction of new fish, addition of new food). In such cases, a change in biobalance occurs. Filters are precisely considered regulators that maintain biological balance in a reservoir.

It is not recommended to wash the internal filter at the same time as other items in the aquarium. The filter elements are washed with aquarium water. Washing the ceramic filler (if there is one) is performed no more than once a month. It is not recommended to rinse the filter material with hot water.

Cleaning the bottom filter

The rules for caring for such a device are not complicated at first glance. You will need to wash the bottom filter (false bottom) approximately once every three to four months. If there are a large number of plants in the aquarium, its use is unacceptable, because the soil will no longer contain nutrients. Even taking into account the fact that branded models of bottom devices have a large number of technological holes, in order to clean it you will need to remove it from the aquarium.

Cleaning the external filter unit

In order not to damage the surface of the bathroom, it is better to place all parts in a basin. It is better to wash the filter sponge in a bucket. When disconnecting the hoses, you will need to use a rag to remove the water. To disassemble, open the lid to remove all the parts. They are installed in the reverse order.

The coarse sponge may need to be replaced. Then the walls of the filter apparatus and its plastic parts are cleaned. Don't forget to clean the magnetic rotor with a toothbrush or cotton swabs. To get to it, you need to twist and pull out the guide that secures the entire device. The parts and sponges are washed with siphoned aquarium or boiled water, and the filter is put back together.

Cleaning the internal filter

The device is disassembled into its component parts. All elements are washed: filter material, containers, motor, cap. We clean the internal cavity using cotton swabs. The air intake adapter needs to be washed. Use a needle to clean the holes. The device is assembled and installed back.

How to understand that it is not cleaning that is needed, but replacement or repair?

When the filter begins to work weakly, intermittently, or does not work at all, and cleaning does not give any results, we can conclude that it is broken. To make sure of this, you can turn it off, remove it from the aquarium and conduct a thorough inspection.

First of all, it is recommended to check the wires (especially at the output of the device). Often, during long-term use, their shell is damaged, they spark, which can lead to dangerous consequences. In this case, the device needs simple but urgent repairs.

During inspection, special attention should be paid to the appearance and operation of the impeller. It should spin evenly, without interruption and without any damage. Otherwise, you cannot do without repairing or replacing this part.

IMPORTANT! A breakdown of the impeller (and, accordingly, the entire filter) is also indicated by strong noise, rumble and vibration during filter operation.

Suspicion should be caused by external damage to any parts of the filter system and an unpleasant burning smell.

Any aquarium is a complex ecosystem, the balance of which can easily and irreparably be disrupted by illiterate care. The filter is an important element of this system. Timely cleaning and inspection will ensure its correct operation for many years and avoid serious troubles.

How often should internal fillers be changed?

Foam fillers can last as long as the filter itself. In extreme cases, this is determined by appearance. The remaining fillers are also used repeatedly (even for several years). The functioning of all fillers also needs to be closely monitored, but it is not immediately necessary to think about replacing them.

It is worth noting that disassembling, cleaning, and assembling aquarium filters must be done without delay. This will not cause much damage to the aquatic system. After the work is completed, the process of full biological filtration will be restored.

Is cleaning necessary?

The aquarium filter must be cleaned, regardless of its type and features.

By passing water through itself and purifying it, it gradually becomes more and more polluted. The filter material, tubes, impeller and other parts become clogged with filtered dirt, remnants of decaying organic matter, and harmful substances. This causes the filter's efficiency to decrease over time.

At some point, it stops purifying and begins to release dangerous toxins into the water. This leads to severe disturbances in the biological balance of the aquarium and all kinds of diseases of its inhabitants.

Advantages of Aquael

The effectiveness of Aquael products is confirmed by the experience of many aquarists. Transparent water improves the aesthetic component of the appearance of the vessel indoors, and also guarantees good health for the fish and prolongs their life.

The manufacturer takes his business seriously. High-quality high-tech devices produced by the company last longer than their competitors. The warranty period for the FAN series is three years.

Aqual filters are easy to use and good for beginners. The devices are easy to install and clean.

There are no products in the series with a degree of protection lower than IP68. This marking means that the mechanism is completely protected from water penetration. Thanks to this, complete safety is achieved during uninterrupted operation and complete immersion of the body in water.

Is it necessary to wash the aquarium?

Many people say that to clean an aquarium at home, it is enough to have “orderly” fish and snails. But in fact, this does not always help, and sometimes clogs the aquarium even more. Therefore, the vessel in which your pets live will have to be washed regularly. How often you do this depends on the size of the tank. Vessels with a volume of more than 200 liters are washed once every half month, and small ones will have to be cleaned twice a week.

Preparing a new aquarium

As soon as you purchase an aquarium and special devices for the life support of fish, you need to prepare it for occupancy.

Before washing a new aquarium, it is necessary to let the silicone odor disappear for a while at room temperature. After this, wash the glass container with warm water and baking soda. Then pour half the volume of water into the container, install the decorations and filter. After 24 hours, add the second half of the liquid so that approximately 5 centimeters remain from the top edge of the aquarium. The next step is to populate the container with fish.

Cleaning the walls

First of all, let's look at how to clean the walls of an aquarium.

Be sure to turn off all electrical equipment!

In absolutely any aquarium, over time, a coating forms, both limescale - from poor quality water, and green - due to the presence of algae. It is precisely these, not very pleasant factors, that we will encounter sooner or later. Internal pollution makes glass and water cloudy and, as a result, unsuitable for your pets to live in.

First, you should thoroughly wash the aquarium glass.

What is needed for this

First of all, you need to learn how to properly clean an aquarium, because the appearance of the fish house entirely depends on this.

This can be done using the following devices:

special scrapers with a metal blade
nylon sponges
regular kitchen sponges

Let’s tell you a little secret: “You don’t need to wait until the walls are covered with a cloudy coating.”

Periodicity

Make it a rule to wipe the glass of the aquarium at least once a week, even if at first glance they seem clean. This procedure is much simpler than washing cloudy glass that was two or three weeks old.

If you decide to clean the walls of the aquarium without removing its inhabitants, then the use of any detergents is strictly prohibited.
If you are planning a planned cleaning with the relocation of its inhabitants, then for this you can use a special washing sample of potassium permanganate solution.

It is with the help of these rules that you can easily wash off plaque of almost any complexity.

Rules and best ways to clean the filter in an aquarium