17 ways to clean a toilet from stone and yellow plaque

The perception of the interior of a particular room largely depends on the details. So, for example, the appearance of clean and snow-white plumbing can transform even the most mediocre interior and give the room a neat look. Conversely, yellowish marks on the surface of a bathtub or toilet will instantly ruin the impression of the most expensive interior. Very often, owners of new apartments have to deal with pollution inherited from previous owners. Sometimes the cause of plaque formation is poor quality water. Be that as it may, before you decide to completely replace the plumbing, you should try to cope with the problem on your own. In this article we will talk about proven ways to clean a toilet from stone and yellow plaque using simple and affordable means.

Reasons for the formation of pollution

Before starting an active fight against different types of pollution, you need to determine the cause of their occurrence. This will also help prevent re-contamination in the future and make it easier to maintain the plumbing. There are three main reasons:

Unsatisfactory condition of engineering communications. And we are not talking about old metal pipes inside the apartment, but about a common water main. Previously, pipes were made of galvanized metal, which began to corrode over time. Small fragments of oxidized iron entering the water color it and yellowish traces of rust form Also, the cause of rust formation can be an excessive amount of iron in tap water and a leaking toilet tank;
The reason for the formation of limescale is the presence of a large number of minerals and compounds in the water. As they settle on the surface of the toilet, they form a hard and durable coating of a grayish tint;
Urine stones often form due to careless use of plumbing fixtures or as a result of a combination of the last two reasons. Especially often, urinary stone appears on the surface of the toilet in families where there are small children who do not yet know how to flush the toilet or do not do it completely. The plaque has a characteristic yellow-brown color. And if limescale is simply present on the surface, then urinary stone, consisting mainly of mineral substances, can emit an unpleasant odor. In addition, urinary stones contain many microbes.

Before we begin to consider various methods of removing contaminants, it is worth noting that only relatively fresh traces of rust, plaque or stone can be completely cleaned off . It is almost impossible to wash off old stains without mechanical cleaning. In turn, mechanical cleaning will lead to disruption of the integrity of the toilet bowl coating, the formation of characteristic marks and scratches. These places will be the most vulnerable and in the future, in the absence of regular care, it is on them that stains will form again. Therefore, in such an advanced case, it is still worth thinking about replacing the plumbing and not wasting effort and money on restoring it.

Why does the toilet lid turn yellow?

There are several reasons for the appearance of a yellow coating on the lid:

Lime deposits are mixtures of magnesium and iron salts contained in tap water. The more uneven, rough the surface of the plastic, the more intensely the film of mineral salts lingers on it;
Urine stone is the result of a buildup of dried drops of urine;
The service life of the kit, made of low quality plastic, is too long. In order to reduce the cost, light stabilizers that inhibit the aging process and antioxidants that protect against oxidation are not added to such material.

If the plastic has changed its color over time, it is wiped with alcohol or Whiteness, which has a bleaching effect. In other cases, special products are needed to dissolve old salt deposits.

Limescale removers

Limescale is a hard deposit that cannot be washed off with gentle means. Many housewives recommend using the following methods:

No. 1. Cleaning with abrasive powders. It is really effective, since we affect the contamination with microscopic, but still solid particles of abrasive. At the same time, not only plaque, but also scratches are erased from the surface. As a result, areas that lack the characteristic shine may form on the surface of the once smooth and shiny toilet. This is the negative side of mechanical cleaning, which we have already mentioned, so its use is quite controversial;
No. 2. Alkali-based compounds will help deal with plaque without harming the surface Products used to clear clogged sewer pipes are excellent. But there are some precautions here too. If your toilet is made of plastic, then it is better to refrain from this method, as well as from using compositions based on various acids. All alkaline products contain sodium hydroxide. It is he who breaks down the plaque. Simply pour the product into the toilet, close the lid and leave for several hours. After this, carefully go over the walls and problem areas with a brush. You can do it differently - scoop the water out of the drain hole, having first blocked the flow of water into the drain tank, apply the product to a piece of cloth and cover the area of contamination. This must be done with protective gloves and do not forget to ventilate the room. After a couple of hours, you need to rub the area, and then fill the tank and rinse with water;
No. 3. A more aggressive agent is acid. You can use acetic acid. Simply pour the product into the toilet, close the lid and leave it to work overnight. The next day, thoroughly scrub the stain with a brush and flush the water several times. If you didn’t achieve the desired result the first time, you can try again;
No. 4. Sometimes acetic acid remains powerless against persistent and old plaque. Then you can use a more aggressive acid - hydrochloric acid. However, this method is strictly contraindicated if your pipes are plastic. If they are made of metal or cast iron, you can act on plaque but no more than 1 time. Pour 200 ml of 33% hydrochloric acid solution into a container with a convenient dispenser or spout. Very carefully, in a thin stream, distribute the acid over the entire surface of the toilet. Immediately close the lid and set aside for 20 minutes. After that, just flush the water several times. When working with this substance, you need to be extremely careful, protect your hands and preferably your respiratory and vision organs;
No. 5 You can also treat plaque with oxalic or citric acid if it has just begun to form on the surface. The acid is diluted in warm clean water in such a proportion as to ultimately obtain a solution of 5% concentration. The liquid is applied to the stains for several hours, then rubbed with a brush and washed off;
No. 6. Chlorine products may have the desired effect. They are simply applied to the surface, left to act for several hours, and then cleaned with a brush or brush;
No. 7. Unusual ways to combat limescale include exposure to carbonated drinks. Or rather, Coca-Cola or Sprite. The fact is that these drinks contain a large amount of citric acid. Just pour cola into the toilet and leave it overnight. You will need 2-3 bottles. If a miracle does not happen, then the pollution is too persistent;
No. 8. In this case, you can try treating the surface with electrolyte. Surely there is a motorist in the family who has this solution. Pour 1 cup of liquid into the toilet, distributing it along the walls. Leave on for 15 minutes and then rinse with water. This method is also not recommended for use with plastic pipes;
No. 9. Veterinary pharmacies sell a product called “iodine monochloride”, which does an excellent job of breaking down stones. Apply the solution to the desired area and after no more than a couple of minutes, rinse with water. This product is contraindicated for use if pipes are made of cast iron, or if there are aluminum elements with which direct contact may occur.

Adviсe

A few life hacks from experienced housekeepers will help you keep your toilet plumbing clean. By adjusting the flow in the tank, you can reduce the accumulation of urinary stones in the toilet.

Chemical cleaning products have a strong, unpleasant odor . It is better to close the toilet lid while treating urinary stones. Otherwise, strong odors can cause headaches.

Thick, ingrained yellow deposits will remove battery electrolyte. Having protected your hands with gloves, your eyes with safety glasses, and your respiratory tract with a respirator, the walls of the toilet bowl are filled with electrolyte. In just five minutes, your plumbing will shine like new.

All the most important and useful information on cleaning the toilet is presented in this section.

Rust removers

There are many ready-made household chemicals designed to remove traces of rust.

You already know about them from advertising. Let's talk about folk remedies:

No. 10. Solutions of various acids, work well against yellow marks . It is necessary to take 100 g of a solution with a concentration of no more than 5-7% and distribute it evenly over the surface of the toilet and leave half for pouring into the flush tank itself. After 10-15 minutes, no more, you need to rinse and go over the bowl with a ruff or a brush with stiff bristles;
No. 11. Another effective remedy is sodium dioxide. You will need 1 tbsp. baking soda and 200 ml vinegar. The vinegar must be slightly heated; under no circumstances bring the liquid to a boil. Dissolve baking soda in vinegar and wipe off any traces of rust with the resulting solution. Don't wash it off right away. Leave the product on the surface for several hours. Then re-moisten the sponge in the solution, wipe off the dirt and rinse with water;
No. 12. Oxalic acid. It is usually sold dry and appears as transparent crystals. You need to pour a little acid onto a cloth or sponge, lightly moisten it with water or alcohol and wipe the surface thoroughly. After this, wait 10-15 minutes, go over the problem areas with a sponge again and thoroughly rinse the toilet with clean water;
No. 13. If traces of rust have just begun to appear, you can try to remove them using regular washing powder. The surface of the toilet bowl should be evenly sprinkled with any powder and left to act for 30 min-1 hour. After this, thoroughly scrub the surface with a brush and rinse with water. For an additional effect, you can flush the toilet with Domestos or any other similar product. If yellowish streaks are still visible, pour regular White over them and leave to sit for 30 minutes. Wipe thoroughly again with a brush and rinse with water. The marks should disappear.

To combat rust, methods using Coca-Cola, hydrochloric acid or electrolyte are also suitable.

Recommendations

hydrogen peroxide and ammonia are mixed in a ratio of 1:2;
pour the prepared solution onto the yellow stains;
wait about a quarter of an hour;
wipe the bath with a sponge or cloth;
If necessary, the treatment is repeated.

When a septic tank is installed, the choice of household chemicals, including for cleaning the toilet, should be especially picky. It is better to give preference to biodegradable drugs that have an environmentally friendly natural composition.

Urinary stone removers

Urine stone looks like dirt with an unpleasant brownish-yellow color. Typically, such stains can be seen under the rim or seat of the toilet. If you see that the spots are not yet very saturated in color, then they are relatively new. Start cleaning by using the most gentle product:

No. 14. First, treat the contaminated surface with ordinary table vinegar. Thoroughly pour the surface with vinegar and leave for 8 hours. It is better to carry out the procedure before bed. In the morning, you need to thoroughly rub the surface with a brush or brush. Often this effect is enough to completely remove the stone;
No. 15. Vinegar can also be used in other recipes. Heat 1 glass of vinegar to a temperature of 40°C, add 1 tablespoon of baking soda with a mountain and a couple of drops of iodine. Carefully move the components until the soda is completely dissolved. Be careful not to inhale vinegar fumes. Pour the warm liquid into the toilet and leave overnight. In the morning, simply rinse with water. If the marks are still noticeable, you can repeat the procedure. Any vinegar, both apple and grape, is suitable for this method, but only 9% concentration;
No. 16. Instead of vinegar, you can use citric acid. Take a package of lemon juice and mix the powder with water. Add water little by little to achieve a paste consistency. The resulting slurry should be applied to the dirt and left to act for a couple of hours. Then wipe with a brush and rinse thoroughly with water;
No. 17. The next method is based on the use of ordinary Whiteness. Remove all water from the drain hole, pour a bottle of product into it and leave overnight. In the morning, you need to rinse the surface thoroughly with clean, preferably warm water.

If you are unable to remove the plaque without leaving a trace the first time, try combining several methods using different active ingredients. Start treatment immediately with the most gentle means and gradually move on to more aggressive methods.

How to remove stains with special compounds?

The assortment of hardware stores offers many special gels, liquids, powders against rust or limescale.

Unicum

The sanitary ware is intended for cleaning the bathroom. The spray is suitable for:

The formula of the product includes a mixture of organic acids, nonionic surfactants and fragrance.

Mr. Chister

Acrylic bathtub cleaner helps remove:

Gives the surface shine, suitable for frequent washing:

Bagi Acrilan

A universal remedy for rust, lime and fungus. Foam spray whitens and disinfects the surface of plumbing fixtures from:

The active ingredients are nonionic surfactants, citric acid and solvents.

Instructions for use require compliance with the following rules:

A bottle with a spray (400 ml) costs about 420 rubles in online and offline stores.

Lemon acid

To prevent limescale from forming in the toilet bowl, it is necessary to use preventive measures. These include:

Expert opinion

Ekaterina Korneva, expert in the field of care, cleanliness and beauty

I will help you understand all the intricacies.

To eliminate limescale, cola must be poured into the toilet so that all problem areas are covered. For ease of application, pour the white into a spray bottle and spray the entire inner surface of the bowl and under the rim, avoiding contact with the rubber elements. Electrolyte If you have any questions, please contact me, I will be happy to answer!

Preventing the formation of contaminants

Once you try to remove traces of old plaque or rust using one of the above methods, you will come to the conclusion that it is better to prevent than to make such efforts.

Especially when you consider that preventive measures are quite simple and require much less time and effort.

To prevent the formation of limescale, use special tablets for the tank. Their main action is aimed primarily at softening water and neutralizing alkalis. They also tint the water in various shades and give it a pleasant aroma;
Gel-like products that are attached to the rim of the toilet disinfect the surface with each flush and prevent the formation of urinary stones;
Make sure that the toilet tank does not leak, otherwise the formation of rust is inevitable;
If the tank is functioning normally, but rust still forms, it is necessary to replace the old water pipes, otherwise the problem will not go away. If the pipes in the apartment are plastic, it means that corrosion has affected the iron pipes of the central water supply. In this case, only installing a filter will help;
Once a week, treat the surface of the toilet with chlorine-containing products or regular white. This is both a method of disinfection and elimination of unpleasant odors, and a way to combat the appearance of limescale;
If the design allows, once a week remove the lid and toilet seat and wash them well with any detergent and then under hot water;
Make sure that all family members use the drain regularly, otherwise your efforts will be in vain.

Tags:Toilet

Previous: How to choose and install a dog enclosure in an apartment
Next: What is: Repair of a one-room apartment

Conclusion

As we have found out, even the most serious contaminants can be removed from the surface of a plumbing fixture. The only thing is that before cleaning the toilet, you need to correctly assess the degree of contamination. For example, for regular scheduled cleaning you can use vinegar or bleach, but if the condition of the plumbing fixture is poor, you should use an electrolyte.

From the video in this article you can find some additional information on this topic.

What can be cleaned with baking soda solution?

Of course, “bathing” in a hot soda solution will not be harmless for all kitchen accessories. You can safely wash away old fat in this way from items such as:

cutlery, dishes and accessories made of metal;
steel rails, hooks and hanging shelves;
glassware;
items made of earthenware and porcelain (except for painted dishes and objects).

Items with plastic parts (knives and cutlery with plastic handles, containers, plastic lids, etc.) can only be cleaned with soda solution if the plastic is durable and heat-resistant. And even then, you should not use the “hard” method of boiling and prolonged exposure to very hot water - the plastic may warp.

It is better not to clean wood products in this way at all - wood swells in hot water and may crack after drying. And products made from varnished wood will be damaged in any case: the soda solution will dissolve the varnish “at the same time” with the fat layer.

It is also better not to put expensive items with gilding or enamel inserts, collectible dishes and interior items at risk and use softer (even more labor-intensive) cleaning methods.