The toilet is clogged: what to do, how to remove the clog at home, how to clean it if the toilet is clogged, how to clean it, why it is clogged, water is standing still

Clogs are the most common plumbing problem. It can be caused by deposits of hard water salts, organic sediments and other debris that gets into the sewer pipe, narrowing its internal opening.

In some cases, a clogged toilet is the result of the actions of apartment owners who dump leftover food, fermented household ingredients and dirty water into it after cleaning the room. How to diagnose a blockage and what to do if the toilet is clogged without involving expensive specialists, let’s try to understand this material.

Types of blockages

The following problems with drainage may occur:

A situation often occurs when biological waste, which is the result of human activity, does not go into the sewer pipe along with the flushed liquid, but, on the contrary, pours out. This means that you need to make a decision if the toilet is clogged - what to do at home.
Events may develop differently. The problem is that the wastewater does not go in the usual direction, but begins to flow out through the drain hole of the sink, bathtub or other plumbing fixtures. Usually this happens not through the fault of the residents of the apartment where the accident occurred, but because the riser is clogged by neighbors living on the floor above. To deal with the problem that has arisen, you should ask them and find out if everything is in order with their drainage. When the riser becomes clogged, then only plumbers who have access to the sewer networks of a particular apartment building can remove the blockage.

Mechanical methods for clearing blockages

If you need to clear a blockage in the sewer system after foreign objects get into it, a good result in solving the problem of how to unclog a toilet can be achieved by mechanical methods carried out by:

using a plunger;
using the so-called “doll”;
using a cable;
using film.

Their main advantage is ease of implementation.

Cleaning with a plunger is used in case of minor blockage. The device should have a cone-shaped nozzle with a diameter of 10 centimeters.

The work is done like this:

The toilet is filled with water.
The plunger is placed in the drain hole and, holding it by the handle, several presses are made.
With a sharp movement, the device is removed from the drain hole. This procedure can be repeated several times.

If there is no such product in the house, you can use a standard plastic bottle with the bottom cut off - it is used in the same way as a plunger.

Using a so-called “doll” is another way to unclog a toilet. A homemade item is made from a fabric bag, which is filled with sand and supplied with a long rope.

The “doll” is used as follows:

It is placed in the plumbing drain hole, holding the rope in your hands.
Press the drain and wait until the water flow carries the bag along with it.
Then he is removed from the toilet using a rope.
Due to its weight, a bag of sand eliminates blockages formed in the water seal.

There is a way to clean a toilet with a cable at home. This flexible sanitary ware is characterized by the presence of a hollow rigid axis and a handle. The handle allows the cable to rotate. At the end of the axis there is a spiral-shaped process, which is attached to the cable with a flexible tube.

If you need to implement a method for cleaning a toilet with a cable, do this:

Lower the end of the tool into the drain hole of the device until it stops.
Performing rotational movements with the handle of the device, slowly push the cable into the hydraulic lock.
When the process of eliminating the blockage is eliminated, the drain system is washed with hot water.

Before cleaning the toilet with a cable, it is important to choose the correct length and diameter when purchasing it. These actions can be carried out, including using a regular product purchased at a hardware store.

You can also use another method than to remove the blockage in the toilet, which is to use a film. To remove objects from the plumbing fixture that have fallen into it, in this case you will need wide tape.

When using it proceed as follows:

The toilet circle is wiped dry.
Strips of adhesive tape are glued to the circle, connecting them together so tightly that a continuous film coating is formed.
When the device is completely sealed, drain water into it.
After performing several strong hand presses on the lid made of adhesive tape, the resulting blockage will be broken through.
After completing the work, the film is removed from the seat.

Causes of blockages

There are several reasons why the toilet becomes clogged:

The most common one is filling the bowl with a lot of paper. Often completely foreign objects get into the device - rags, children's toys, feminine hygiene products, etc.
Often, when the toilet is clogged, you have to decide what to do at home as a result of the fact that it was not installed correctly. The reason for the problem is that when laying pipes, the angle of inclination relative to the riser must be observed, as well as the optimal distance between it and the device.
The absence of elements that equalize the pressure in the pipes during the draining process, such as valves or a drain pipe.
Ill-conceived design of plumbing equipment, if its production was carried out using a handicraft method.

How to unclog a toilet yourself: 4 methods

Before you begin implementing any of the methods described below, you need to make sure that the blockage is local in nature. If the sink in the kitchen and the drain in the bathroom work properly, then the problem is isolated. If the entire sewage system in the apartment is broken, it means that it is unlikely that you will be able to clear the clog in the toilet on your own. In such cases, it is better to call for help from a specialist with professional equipment.

Mechanical

Peculiarity. The easiest way to clear a clog in the toilet is to use a special plumbing cable. Many are accustomed to thinking that this device is the prerogative of professionals. However, you can buy it at a regular hardware store. If you can’t run to the store (for example, it’s night outside), you can walk around your neighbors. Surely one of the residents of the house will have this simple but very useful device. It is important that there are two “rescuers” of the toilet. One person will carefully push the cable inside the pipe. And the second is to slowly rotate the equipment around its axis in order to enhance the cleaning effect.

What to do

We put on rubber gloves and carefully probe the inside of the drain - as far as our hands can reach. If the object that clogged the plumbing is detected instantly, remove it and drain the water by pressing the tank button. If the search turns up nothing, we “arm ourselves” with a cable.
Slowly insert the plumbing cable into the pipe, moving towards the base.
At the same time, we rotate the device, thus breaking up the accumulated deposits.
Before removing the cable, take a bulky rag and begin to slowly remove it, simultaneously wiping the cable segments released from the pipe with the rag.

If water has accumulated in the tank, do not think about draining it. The minimum capacity of a sanitary vessel is 5 liters. If the problem is serious, the liquid will overflow and flood the floor. And if there are no tiles on the floor, water will leak to the neighbors below.

Chemical

Peculiarity. Already from the name of the method it is clear that it is based on the use of special chemicals to unclog the toilet. Their assortment in the store is quite wide, and the price range is even wider. But you don't have to run to the supermarket. Household chemicals can also be prepared at home. To do this, you only need two products that are always found in the kitchen - vinegar and soda.

You will need

soda – half a pack;
vinegar - glass;
boiling water – 3 l.

What to do

First of all, remove all the water that has accumulated there from the drain hole. This can be done using a ladle or other small vessel.
Slowly pour half a pack of baking soda into the pipe.
Following the soda, slowly pour a glass of vinegar into the drain hole. At this moment you need to be as careful and careful as possible, because soda is an alkali, and vinegar is an acid. When these components combine, a violent chemical reaction occurs.
We leave the treated plumbing for 30 minutes so that the chemical reaction is completely completed.
After the specified amount of time, we rinse the drain, gradually pouring 3 liters of boiling water into it.

If you use a special chemical to remove a blockage, take precautions. You can only work with chemicals wearing rubber gloves. It is advisable to open the window for ventilation to avoid poisoning by chemicals.

Pneumatic

Peculiarity. To clean a toilet at home, you need a plunger. The plunger is the main pneumatic pipe cleaning tool. With its help, air pressure is created, which with its force is designed to push the cause of the blockage out of the pipe - be it accumulated toilet paper, a children's toy or cat litter. You can buy a toilet plunger, like a plumbing cable, at a regular hardware store. It is also in the assortment of most supermarkets, and not only construction ones. But if the situation is such that there is no plunger, and there is also no opportunity to purchase or ask someone else, you can use the advice of experienced householders. They recommend replacing a simple device with an even more simple one - an ordinary plastic bottle.

What to do

We take a plunger and insert it into the drain so that the rubber nozzle creates a vacuum in the pipe.
If there is no plunger, cut a mineral water bottle by removing the bottom and inserting it into the drain hole as described above.
We begin to perform mechanical movements and pump air using the means at hand.
The action must be continued until the water accumulated in the plumbing begins to drain at a normal pace.

The plunger is a device of venerable age. It was invented at the beginning of the 17th century and named after its “parent” – Ventouze De La Marcier Farte. This man worked in his specialty - he was a plumber at the court of a French count. And one day he noticed that compressed air has unprecedented power and is capable of pushing forward through the pipe the waste accumulated in it.

Hydraulic

Peculiarity. The hydraulic method can also help clear a clogged toilet. However, experts recommend resorting to it if the cause of the formation of a “swamp” in the plumbing is the accumulation of fatty deposits. In such a situation, supplying water under pressure will be most effective. But be careful! If the pressure is too strong, do not experiment. Due to high pressure, your actions can provoke problems for the neighbors below: their toilet may begin to gush with the liquid that you pour into yours.

What to do

We take an ordinary rubber or plastic hose and attach it to the faucet in the bathroom or kitchen.
We insert the second edge of the hose into the toilet - directly into the drain hole.
Open the tap as much as possible and supply hot water to the toilet for 30 seconds.
After a minute's break, we repeat the cleaning session.
As a rule, the hydraulic method involves several approaches of the same duration.
In the process, hot water melts fat deposits and allows you to defeat the clog.

If none of the listed methods for clearing the blockage is effective, you must urgently call a specialist. Perhaps the problem is in the common riser. This means that as soon as the upstairs neighbors start flushing the toilet, all their sewage will overflow into your bathroom.

Options for cleaning toilets

Popular ways to eliminate the problem of what to do if the toilet is clogged are to use:

hot water;
soda

Hot water is used as the only option if there are no special means at home, and the toilet is clogged - the owner does not know what to do. To do this, you will need to boil a bucket of water and immediately pour it into the bowl of the device at a right angle, acting quickly and thereby creating pressure.

If it becomes clear that the liquid is gradually leaving, which means that the blockage has been eliminated, in order to enhance the positive result, you can additionally use another bucket of boiling water. This method is good for removing small traffic jams.

As for soda, it is available in every home, since housewives use it in many situations and when the toilet is clogged, and you need to figure out what to do at home quickly. You should pour half of the regular package of soda directly into the bowl of the device. As a result, the blockage will dissolve under the action of alkali.

Preventing blockages

Preventing toilet blockages is easier than hassling with removing them. To do this, it is important to adhere to several rules:

do not flush food, personal hygiene items, or cat litter into the toilet;
periodically clean the plumbing fixtures with chemicals - the terms of prevention are indicated on the packaging;
Clean the toilet with hot water every day.

If you follow the rules for using plumbing and take care of it, then blockages will be a very rare occurrence in the house.

Using chemicals when the toilet is clogged

It is much easier to find the answer to the question of what to do when the toilet is clogged if the housewife has specialized tools at hand. Stores that sell household chemicals today offer customers a huge selection of products for cleaning pipes and plumbing fixtures. Also, if you don’t know how to clean limescale in the toilet, you should use one of the chemicals.

They are sold in powders, granules, gels and liquids, not only in single-use packages, but also in large containers or packs that are designed for use several times. These products cope excellently with the problem of what to do if the toilet is clogged.

At the same time, they also perform several important functions:

Plumbing equipment is not only cleaned, but also disinfected.
Eliminates unpleasant odors coming from sewer pipes.
Keep the drainage system clean.
They have a preventive effect on the surface of plumbing equipment.

Common products used when the toilet is clogged and what to do is clear, are the products of the following brands:

Mister Muscle;
Mole;
Tiret;
Domestos;
Tofix;
Domol.

When using chemical compounds, be sure to follow the rules; if the toilet is clogged, how to clean the toilet. They are specified in the attached manufacturer's instructions. They should be followed to avoid damaging the plumbing and avoiding accidental burns.

Be sure to use rubber gloves. People who are well acquainted with chemistry know, if the toilet is clogged, then what to do at home using various acids, such as hydrochloric, acetic, sulfuric, formic. But it must be remembered that aggressive solutions can damage old sewer pipelines and risers.

Folk remedies

Traditional methods help if the toilet is clogged due to all kinds of deposits. Such products dissolve the blockage, so that the drain water quickly returns to the sewer.

Boiling water

The easiest way to clean a toilet is to pour boiling water into it. You will first need to pump out the liquid remaining in the toilet. Then you need to pour 1-2 liters of water inside. It is important to pour boiling water quickly so that a kind of pressure is formed.

You should be careful when using this method. Cracks may appear on the toilet.

During manipulation, splashes may fly off and cause burns. It is also necessary to remember that it is strictly forbidden to use boiling water for plastic pipes.

Soda and vinegar

When traffic jams in pipes are caused by an accumulation of organic matter or salt deposits, a mixture of soda and vinegar will help:

Place half a pack of soda inside the toilet.
Then pour in 1 liter of table vinegar.
Close the drain and leave it for 2 hours.
After this time, pour boiling water inside. Leave to act for another hour.

Then drain the tank and check if the blockage is cleared.

Alkali

A more effective option for unclogging a toilet is to use caustic soda. It quickly removes even long-standing deposits:

Mix 2 kg of caustic soda with 5 liters of cold water.
Pour the prepared solution into the toilet hole and wait. The waiting time ranges from 5 minutes to an hour - it all depends on the location of the traffic jam.
Then pour boiling water inside and drain the tank after an hour.

When working with alkali, it is necessary to use protective equipment - the caustic substance causes severe irritation if it comes into contact with the skin.

Pepsi and cola

If the toilet is clogged, popular drinks like Pepsi and Coca-Cola are practically useless.

They can be used for small traffic jams and as a last resort - when there are no other means at hand. A bottle of soda is poured into the toilet and left to act for a period of 12 hours. If after this time the results are not noticeable, you will need to turn to other methods.

Mustard

A mustard solution prepared in boiling water will help break through simple blockages:

Take 6-8 liters of liquid and add 4-6 teaspoons of mustard powder. Stir until dissolved.
The liquid is poured into the toilet.
Leave to act for 30-60 minutes.

If it is not possible to completely break through the clogged pipes, the procedure should be repeated.

Fairy tricks

You can try to fix the problem using Fairy or another fat-dissolving dishwashing detergent.

Such chemistry will only be useful if fat has actually accumulated on the walls of the pipes. But this is not typical for the sewer leading to the toilet.

Mechanical methods for clearing blockages

The toilet is clogged with paper - what to do if chemicals cannot be used?

In this case, mechanical options for cleaning plumbing are used, for the implementation of which special devices and various products are used:

plunger;
corrugation;
rubber hose;
plastic bottles;
plumbing cable.

It is recommended that every home craftsman have a tool such as a plunger, so that he does not have to call a plumber every time if the toilet is clogged with paper or other debris. Its design is simple - there is an attached rubber hemisphere on a plastic or wooden handle.

How to determine the location of a traffic jam?

The build-up of residues on the pipe walls makes it difficult for water to pass through. Soon the drain becomes clogged and forms a plug, thereby causing a blockage. To determine the location of the plug, you can use a proven method. Try opening the faucet in the kitchen and bathroom at the same time.

If the water runs out as usual, then the problem is in the toilet. If liquid drainage is difficult in the bathroom and kitchen, this indicates problems with the pipe.

As soon as you discover a clogged toilet, do not rush to drain the water from the tank. You should know that its volume is more than 3 liters. It's better to just turn off the tap. This action will protect you from water leaking onto the floor.

For convenience, it is recommended to use a regular bucket. Fill it with a small amount of water (about 1 liter) and gradually pour it into the toilet. if water does not flow, the plug is firmly seated.

One of the main reasons for the formation of plugs in plumbing fixtures is improper operation. Often, the residents of the house themselves can flush various objects and food residues down the toilet, hoping that they will quietly pass into the drain hole.

To prevent water from leaking onto the floor, place as many cloths around the toilet as possible. They absorb liquid well, so the toilet coating will not be damaged

Let's look at some tips to avoid such situations:

If you are thinking about changing pipes, you need to select samples that are identical in size.
When making repairs, the toilet lid should be lowered to prevent debris, dirt and other waste from entering the toilet.
Avoid flushing items such as kitty litter, rough paper, and other types of debris that can cause a blockage. By doing so, you will extend the life of the plumbing fixture and save a lot of money on replacing the toilet.

Use these simple tips to avoid plumbing problems. By adhering to clear operating rules, you will forget for a long time about such a problem as dealing with blockages.

If a hard object, such as a toy, jar or tube of care product, gets into the toilet, there is no need to flush it. It is necessary, wearing gloves, to remove the cause of the blockage manually. Only toilet paper is allowed to be thrown into the toilet. Moreover, it is advisable to use a soft multi-layer one, because... a hard single-layer one can create a jam. You should not wait for the critical phase of plug formation. As soon as the water begins to rinse off poorly, you should resort to simple cleaning measures. The toilet should be looked after regularly: wash the bowl and tank from the inside, fill the plumbing with preventive agents that eliminate contamination, prevent the formation of sediment and subsequent ones.

Help from plumbers if the toilet is clogged

If a home craftsman knows how to deal with the blockage on his own, but the result is not achieved, then the help of a professional is required. Sometimes situations arise when you need to call a plumber immediately.

Only he will determine why there is water in the toilet, despite all the measures taken. Usually the riser below the floor level is clogged. Only a specialist can eliminate the flow of waste flowing over the edge of the toilet bowl.

Localization of the blockage

In order to clean the toilet yourself, you need to find the clog yourself. Watch how water flows from the bathtub or washbasin sink. If no failures are observed, then there is a blockage in the toilet siphon, the cuff that connects it to the sewer or outlet. Localization of blockage in a common pipe is expressed in the form of stagnation of water in the bath.

When there is a blockage in the riser, wastewater begins to gush out of the toilet. In this case, it is impossible to remove a clogged toilet with your own hands. Only professionals can cope with such a situation. It is urgent to call plumbers.

Preventive measures

When the question often arises: what to do if the toilet is clogged, you need to remember the rules for handling plumbing fixtures so as not to provoke unpleasant situations with clogging of the sewer system:

You cannot throw a foreign object at it. If one of the family members accidentally drops something into the bowl, it is advisable to remove it immediately.
It is prohibited to throw leftover food into the toilet, even when it is liquid. The fact is that fats accumulate on the inner bend and form a plug over time.
When renovation work is going on in the bathroom, it is better to carefully cover the plumbing fixtures so that construction debris does not get into the fixture.
In order to prevent blockages, it is necessary to periodically use special means that will keep the pipes clean. When using them, you must follow the manufacturer's instructions.

Homeowners who have had to deal with a clogged toilet - they already know who to call. No one can solve the problem of a clogged toilet better than a plumber.

General principles of sewerage operation

The sewer system consists of a riser and pipelines that are designed to drain liquid waste from plumbing fixtures. The riser is a large diameter pipe and is usually located in the bathroom.

If the toilet in an apartment in a multi-storey building stops draining water due to a clog in the riser, this is a problem for all residents. Only utility workers can solve it. Special inspection niches are provided for cleaning risers

Modern risers are often made of plastic, but many houses still have cast iron pipes. The advantage of cast iron is strength, and plastic risers are less susceptible to blockages. Most often, old cast iron pipes become clogged. There are burrs on their inner walls, which causes deposits to quickly form.

To prevent air from the sewer from entering the room, a siphon is provided in the design of the toilet - a bend where a water plug (hydraulic seal) is constantly located. When flushing, water displaces and replaces this plug, pushing sewage from the toilet into the sewer riser.

When you press the button on the tank, the water drains into the bowl, washing it, and passes further through the pipe into the riser. The clog prevents the toilet from working properly and water remains in the bowl

If there is debris in the pipe and the water has not pushed it out into the riser, a clog may form. Scraps of paper, waste, hair, threads get caught on sharp or large objects. Gradually, all this turns into a large lump of dirt, which narrows or completely blocks the pipe section.

The toilet is clogged - cleaning it with a “doll”

A fairly common and effective method is the use of a “doll”.
This device is a fabric bag that is filled with sand and has a long rope. How to remove a blockage in the toilet using a “doll”:

Make a device.
Lower the bag into the drain hole, holding it by the rope.
Drain the water in the tank. This will lead to the fact that the “doll” will go with the flow of water and with its mass will be able to break through the plug that appears.
When the water goes away, you need to carefully pull the rope and remove the bag from the drain.

When making a “doll”, it is recommended to use a fairly long and strong rope. Using old rope can cause the bag to tear off, causing the drain line to become completely clogged.

When can you do without a tool?

To begin with, a few general concepts.

The reasons for a clogged toilet can be very different. It’s funny, but using plumbing fixtures for their intended purpose does not cause problems: in fact, that’s what it was created for. Only those objects and substances that, in general, have no business in the sewer system are to blame.

Tip: A printed or handwritten sign asking people not to throw thick paper or foreign objects into the toilet is a very simple but very effective solution. It will tell your family and, most importantly, guests how to help you avoid unnecessary troubles.

If the toilet is still clogged, you should first localize the cause of the blockage. It depends on her whether it is worth trying to remove the blockage yourself.

There are four options.

A floor rag dropped into the toilet or the contents of a cat litter box that has clogged the neck can only be removed using a plumbing rope . Any attempts to solve the problem without a tool will be a waste of time. If this is your case, you can call a plumber or go to the store for a cable.
Large construction waste and large food waste (cucumbers, boiled and raw potatoes, meat, fish) can only be removed manually . The only chance to solve the problem is to arm yourself with rubber gloves, scoop out excess water with a ladle and pull out all foreign objects with your hands. In the most severe cases, this requires dismantling the toilet: if pieces of plaster or broken glass are wedged near the outlet, it is simply impossible to reach them through the neck.

In the most advanced cases, dismantling is necessary.

Construction mixtures frozen below the water level are the most unpleasant case . If this happens, you can safely go for a new compact.
Finally, paper and soft food waste (thickness from sour borscht, porridge, etc.) are those blockages that can be removed independently.

Types and methods of cleaning a clogged toilet

Mechanical cleaning

Mechanical cleaning is carried out if there are small children or pets in the house. But it is not possible to block their access to the work site. Mechanical methods of removing the plug allow you to immediately clear the blockage from the pipe. You won't have to wait long.

How to clean a toilet with a plunger

How can you break through a toilet at home? The plunger should always be located next to the toilet. It makes it quite easy to deal with traffic jams. You can clear a small clog in the toilet by following these steps:

the rubber part of the plunger is immersed in water; if there is not enough water, it must be added;
the drain hole must be completely closed;
The plunger is rhythmically pressed inward, then returned to its original position.

A plunger gradually removes clogged particles and cleans the pipes.

What you shouldn't flush down the toilet

Nothing other than ordinary toilet paper, which quickly decomposes, should be flushed into the central sewer system. The rest may clog it.

Tampons, pieces of even very thin cellophane should not be thrown into the toilet at all.

Fat remaining in a frying pan after cooking should not be washed down the drain. It is carefully wiped with paper and thrown into the trash.

Tea leaves can also form the basis of a cork. It is not always possible to remove clogs in the toilet and deposits on the walls of pipes at home. Therefore, you need to be careful.

Chemical compositions for cleaning

If the cause of the blockage is the formation of limescale, you can try to soften it using any high-quality compounds intended for this:

Domestos: in addition to Domestos itself, the group of these fairly inexpensive and quite effective cleaning products also includes the Cif brand, produced by the same manufacturer;

Domestos-gel
Procter&Gamble: able to cope not only with plaque, but also with rust;
Cillit: a widely advertised product is also quite suitable for cleaning even heavy deposits;
Jonson&Jonson: used for cleaning hard-to-reach places, has packaging in the form of a “toilet duck” - a tube with a curved dispenser spout, which allows you to pour the composition along the rim of the toilet, simultaneously cleaning the accumulated plaque in this area;
Tiret: a product for removing limescale deposits and preventing them;
Sanita Gel: another high-quality product from a Russian manufacturer.

If you have already encountered the problem of clogs and know some other brands of products that can clear plaque from your plumbing, you can certainly use them. We have listed only the most well-known manufacturers whose products really work (unless, of course, you buy a fake).

Important!
Before using any composition, be sure to read the instructions. Most of these cleaners are designed for use in drains with cast iron or plastic pipes. Unfortunately, they can damage steel pipes.

Video: How to unclog a toilet yourself without difficulty at home

Traditional cleaning methods

The first thing that comes to mind when the water doesn’t drain well from the toilet is to clean it with a plunger. But sometimes it simply isn’t in the apartment, and it’s not possible to go to the store for chemicals. Then simple remedies will come to the rescue, using which you can remove small blockages without a plunger.

Boiling water

This is the most affordable way that can be offered. A clogged toilet can be cleaned with boiling water. It is necessary to heat a bucket of water and pour it into the drain hole so that the water falls perpendicularly. The manipulation should be repeated twice or three times.

Attention! Toilets made of earthenware may not withstand hot boiling water. After each procedure, microcracks will appear. Ultimately, they will cause the toilet to crack.

Sewage pipes made of plastic are also not designed to withstand such high temperatures. Under the influence of boiling water they will become deformed and fail.

Therefore, the water should be as hot as possible, but not boiling. The exception is stainless steel toilets; boiling water will not cause any harm to them.

Soda

Baking soda is a simple remedy that can be found in almost every home. It is usually used for household purposes to clean and disinfect surfaces and plumbing fixtures. But, since soda is an alkali, you can try using it to remove a clog that is not too dense.

To do this, you need to scoop out the maximum amount of water from the toilet, add exactly half a pack of soda, and try to push it away with a brush. Afterwards, leave for 20 minutes and rinse generously with several buckets of hot water at a temperature of 50-60 ºС.

Baking soda will not only remove the blockage, but will also additionally clean the toilet of limescale. The advantages of this method: there is no possibility of poisoning from toxic fumes, no pungent odor.

Soda with vinegar

You can enhance the effect of using soda by adding vinegar to it. You will need concentrated 70% acetic acid.

Removing a clog in the toilet goes like this:

remove as much water as possible from the drain hole;
pour ¾ pack of baking soda inside;
pour a glass of acetic acid and close the toilet lid tightly.

When baking soda and vinegar are combined, a violent chemical reaction is formed that can destroy the garbage plug.

You need to work with acetic acid very carefully. Under no circumstances should the product come into contact with mucous membranes or eyes. If this happens, the affected area should be immediately rinsed with plenty of cool water and consult a doctor immediately.

How to quickly remove with special chemicals?

In stores you can find a large number of pipe cleaning and sewer maintenance products. The drugs are available in various forms, differing in price , exposure time and composition.

Most household chemicals used to remove blockages have an aggressive composition, so they should be used strictly according to the instructions and in compliance with safety precautions.

Sanox gel Pure stock

The drug is intended for pipes - eliminates odors and blockages. The composition contains surfactants. Suitable for use when organizing sewerage with plastic and cast iron pipes.

Advantages of the product:

low cost;
ease of use;
efficiency;
price;
suitable as a means of prevention.

Minuses:

it takes time to achieve results;
may not help with serious blockages.

The price, depending on the point of sale, can be up to 100 rubles. Read reviews here and here.

Mr.Muscle active gel

The product is available in liquid form, completely ready for use. For mild blockages, the exposure time is literally a few minutes due to the high concentration of active components. If the water stopper is caked and hardened, Mr. Muscle may need several hours to work.

Advantages:

high efficiency;
active composition;
fast action;
ease of use.

Minuses:

caustic composition;
price;
For severe blockages it will take several hours.

Price – about 300 rubles for a 0.5 liter bottle. In the same series of products, the manufacturer produces not only gel, but also sachets with powder for removing blockages. Read reviews here and here.

Deboucher

The product is designed to clear sewer blockages. It has a thick form, actively interacts with substances that impede the passage of water, and eliminates odors.

Advantages:

fast action;
efficiency;
safety for all types of pipes.

Cons: high consumption. The cost is about 200 rubles on average. Read reviews here.