What to do if the gel pen does not write?

What to do if the pen doesn't write? Of course, this stationery item is inexpensive, and you can always buy a new one. But sometimes with each new purchase we get another problematic pen - they either don’t write at all or stop leaving marks on the paper after a while.

And many people are concerned about the question of whether they can somehow be revived. So, here you can find out what to do if the pen does not write.

What to look for when buying a pen for occasional use?

Let's look at the options for pens that meet the requirements - they write beautifully and do not dry out for a long time.

Immediately sweep away the liners and capillary ones. Undoubtedly, they write beautifully, elegantly and are even suitable for calligraphy. But there is a significant drawback - they dry out quickly. Because they are actually felt-tip pens, but made using pen technology.

Ballpoint pens last the longest because the paste contains an oil rather than a water-based substance. The shelf life of such pens is from 2 to 5 years. But not all of them write beautifully. Cheap ones can smear, skip, and leave an unevenly saturated mark. For inexpensive models, you should take a closer look at the Uni and Pilot brands. They write richly and accurately.

With rollerballs, you don't have to worry about the ball spoiling or the contents of the rod sliding down. Simply because the ball rotates 360 degrees, and the writing is made of water. The shelf life is generally 2-3 years. But for some manufacturers, for example Pentel, it can reach 5 years. The rollerballs write beautifully and are pleasant to use.

How to remove mechanically?

The fastest and most obvious way to disguise a mistake is to use a special correction pen . But many may not be happy with the fact that at the site of the mistake there will be a white mark that will be visible against the background of the paper.

To obtain an almost perfect result, when not a trace remains on the sheet, you can use the mechanical method.

Using a blade

The easiest way to remove a written error is to clean the inscription using a regular blade.

In this case, it is important to ensure that the surface of its plate is perpendicular to the surface of the paper sheet. Using the blade, the ink appears to be scratched from the paper with gentle movements .

Visible protruding fibers can be easily removed by cutting them off with a blade pressed tightly to the surface of the sheet. This way you can eliminate the consequences of a typo without damaging the paper or leaving any visible marks on it.

Sandpaper

Sandpaper will also help to cope with the blot. At the same time, it should be small in order to minimize mechanical damage to the paper sheet.

If you erase the inscription very carefully and carefully, the manipulations performed will remain invisible. Using this method, you can eliminate both minor errors in the text and larger details on paper.

Medical plaster

A medical plaster, which is available in most home first aid kits, will help you eliminate errors . In order for the manipulation to be completed without leaving a trace, you need to cut off a small piece from it in accordance with the size of the clerical error on the paper.

Press the patch onto the surface of the sheet and then carefully remove it. In this case, simultaneously with the adhesive tape, a thin layer of paper is separated along with ink. This procedure requires care and attention, but the result is worth the effort.

Effective chemistry

To remove gel ink, you will need one of the following: bleach or bleach solution, a mixture of potassium permanganate and acetic acid, or hydroperite.

Bleach or white

If there is only dry bleach in the house, it must first be diluted with a small amount of water. Next, you need to dip a cotton swab into the whitening solution, remove the excess and carefully apply it to the desired area of paper.

Before carrying out all the manipulations, you need to place an additional sheet of paper under the sheet with the typo. Using careful movements so as not to damage the fibers of the paper, you need to wipe the area of the blot soaked with bleach until it completely disappears.

The price of bleach is from 200 rubles. The price of whiteness is from 40 rubles.

Potassium permanganate and vinegar

The second chemical method for eliminating unwanted inscriptions with a gel pen is the use of a mixture of potassium permanganate and acetic acid. To prepare you will need a teaspoon of 70% acetic acid solution and several crystals of potassium permanganate .

It is necessary to carefully apply the substance to the desired place on the paper and rub until the inscription completely disappears.

The peculiarity of this method is that the result is a small brown stain obtained from the use of a solution of potassium permanganate. But it is quite easy to get rid of it by wiping the area with 3% hydrogen peroxide.

Upon completion of all these manipulations, the paper sheet is dried with an iron. The price of potassium permanganate is from 37 rubles.

Hydroperite

Hydroperite has good effectiveness as a stain remover , a solution of which can be prepared independently by diluting 4 tablets in 50 milliliters of plain water. The price of hydroperite is from 36 rubles.

You will find many useful tips and recommendations on removing pen ink from various surfaces and objects here.

How to clean the pen core from paste?

Alcohol and alcohol-containing solutions: cologne, vodka. Alcohol dissolves the paste, but color stains may remain on the fabric. On artificial leather, alcohol only removes fresh marks. It will not be possible to completely remove an old ballpoint pen stain with alcohol: it will only lighten, but will not disappear.

Interesting materials:

Who is switching to a 4-day work week? Who is the first bachelor or master? Who should sign the contract first, the customer or the contractor? Who should sign the contract first? Who pays sick leave first? Who signs the order first? Who first came up with a pension? Who was the first to set foot on the shores of Antarctica? Who is the first to enter the new house? Who is the end of February according to your horoscope?

Who invented the 2nd grade ballpoint pen?

Modern ballpoint pen

invented by the Hungarian journalist László Bíró (Hungarian: László József Bíró) in 1931 and patented in 1938.
In Argentina, where the journalist lived for many years, such pens
are called “biromes” in his honor.

Interesting materials:

What is ascii and Unicode and what is the difference? What is AutoFormat Table? What is Xiaomi autostart? What is an infinite number sequence? What is Bixi? What are business chats in Viber? What is Bluetooth and how to use it? What is the clipboard in Odnoklassniki? What is the clipboard in Viber? What is Chrome Setup?

LiveInternetLiveInternet

Registration
Entrance

—Quote book

All (2342)

May you be lucky in Love! https://www.playcast.ru/uploads/2013/10/09/6272724.swf

MYSTICITY OF MOON NIGHT.

Black Amazons of Dahomey Dahomey Amazons. Restored photograph from the 19th century.

Where 10 Ancient Civilizations Disappeared Like Indiana Jones, lone archaeologist David Hatcher Childre.

Serbian artist Endre Penovác. Watercolor. .

—Tags

-Music

All (85)

—

To the application

—Search by diary

—Subscription by e-mail

-Statistics

Corrector pen

A correction pen is an indispensable attribute of any student. It is found in any office and often helps out when you need to quickly and quietly correct a mistake. But what to do if the corrector pen does not write?

In fact, they dry out quite quickly and also often begin to leak, which complicates the work.

If the new correction pen does not write, then it must be shaken well for several minutes. Then remove any leaking marks on the tip. And you can start working.

If this doesn't work, try pressing harder when correcting mistakes - this will release more of the corrective agent. In cases where the corrector is water-based, when it dries out, you can soak the tip and the pen will work again.

What to do if the pen does not write

If a ballpoint falls out of a ballpoint pen, it cannot be saved. You won't be able to insert the ball, but you can get the paste dirty from head to toe. Accept the loss.
If the paste of a gel or ballpoint pen has leaked out of the refill, the easiest way is to throw it away, since when cleaning it and subsequent use there is a high chance of staining both yourself and the environment. But if there is no choice, then disassemble the mechanism on sheets of paper and wipe each part with wet wipes. Then assess the level of paste in the rod, blow it out and assemble the handle.
A new pen often writes poorly due to poor ball break-in. This is why a new pen needs to be painted, and in some cases, a little more effort than usual.
If a pen doesn't write after it hasn't been used for a couple of months, it usually means the paste has thickened too much. And if you don’t use it even longer, the paint inside the rod will completely dry out. To solve this problem, experts advise using one of two methods. The first is to heat the metal tip with a lighter to soften the ink. It is not recommended to use it due to the fact that open fire is unsafe. In addition, this way you will most likely just melt the plastic rod. The second way is to hold the rod under hot water. This technique is safer. If it is not possible to use hot water, then you can simply rub the rod in your palms.

But sometimes malfunctions occur not with a cheap ballpoint or gel pen, but with a more expensive and prestigious one - a fountain pen.

Why did my almost new gel pen stop writing?

As the name suggests, the core of a gel pen is filled with a viscous substance. It is this thick consistency that we should be grateful for for the beautiful rich and glossy mark on the paper. This property is especially appreciated by artists who create amazing illustrations using gel pens.

For the same reason, the writing substance in the rod quickly runs out. Faster than any other type of pen. Therefore, it is extremely irrational to use them for notes. Also, the gel may dry out if the handle is located close to the heater. Or when it is stored without a cap.

But most modern manufacturers add special substances to the gel that maintain the viscosity of the substance longer. On average, the shelf life of a gel rod is from 2 to 3 years.

Sometimes, with infrequent use, the gel dries out on the ball. And yes, in such cases the pen also stops writing. In such cases, you need to write the pen well. If that doesn't help, wipe the ball with nail polish remover.

And most importantly, never place a gel pen with the writing side facing up. While you are not using it, the contents of the rod will slide down. The pen will stop writing. It can only be thrown away.

These tips will extend the life of any pen that has a ballpoint writing element - gel, rollerball, ballpoint.

A fountain pen

What to do if your fountain pen doesn't write? Typically, inexpensive items suffer from this problem, while exclusive hand-built models are less susceptible to such malfunctions. But occasionally problems arise for them too.

If the new pen writes intermittently and with a slight squeak, this is a break-in problem, exactly the same as with a ballpoint analogue. The pen needs to be painted, and this takes time and patience.

But what to do if the problem does not disappear over time? Most likely, the problem is the factory lubricant that has clogged the feeder channels. Occasionally, tiny metal shavings may end up there. In case of this problem, it is recommended to rinse the pen:

Disassemble the mechanism.
Rinse under running water to remove the ink. Use only cold water, as hot water can deform some parts.
Soak the feather for 1-2 hours in clean water.
Dry the handle. The procedure will take from 12 to 24 hours.
Assemble the mechanism.

Also, washing a fountain pen should be done if it has not been used for a long time and there is a risk that the ink has dried out. If the pen malfunction cannot be resolved by washing, you should contact customer service.

Folk recipes

You can use acids, soda or lemon juice.

Acid method

An effective and common way to remove gel pen from paper is the “acid” method. The acids used for it are citric and oxalic .

They are able to enter into a chemical reaction with the main substance of the ink, leading to its complete dissolution.

Acids are mixed in equal proportions and a little water is added. The resulting mixture is applied to the blot, then wait 5 minutes and apply a new portion.

To get the best effect, the acid mixture is lightly rubbed into the paper so that it interacts with the ink as much as possible. Such actions are carried out until the typo completely disappears, after which the mixture is carefully removed and the paper is dried with an iron.

Soda

The method that our parents used to remove blots is to use a mixture consisting of water and regular baking soda. The resulting mixture is applied to a paper sheet and left until completely dry, after which the remaining soda is removed.

This method is good when it is necessary to correct errors in the text, since small particles of soda, penetrating into the fibers of the paper, color it white, and the blots become almost invisible.

A mixture of salt, soda and lemon juice

To achieve a better effect, you can use a mixture of salt, soda and lemon juice.

Soda and salt are mixed together in equal proportions, after which the mixture is applied to the place where the mistake was made . Next, carefully add lemon juice, waiting for it to enter into a chemical reaction with soda and salt.

Lemon juice helps neutralize the paste of soda and salt, which can penetrate deep enough into the paper fibers, almost completely eliminating traces of gel ink. To make it convenient to apply lemon juice to the surface of a paper sheet, you can use a medical syringe.

What to do if the pen does not write: types of faults and their elimination