Plastic containers are very convenient for storing water supplies. It is lightweight, costs much less than its metal counterparts, but there is a problem - plastic bottles or canisters are very difficult to wash. It is almost impossible to get to the bottom of the vessel to wash off the green residue, but there are life hacks that will help you quickly and efficiently cope with this task.
Alkali treatment
To clean plastic bottles, you will need baking soda and water. Pour soda into a container (for a 20-liter eggplant you will need 200 g of soda) and add a small amount of water to make a thick porridge. Then close the lid of the container and leave for several hours for the reaction to appear. To enhance the cleaning process, you can shake the container several times. At the end, the cleaned plastic containers should be rinsed with running water.
Soda is an excellent antiseptic, so it will clean the container not only of visible plaque and dirt, but also of harmful bacteria.
Wash greens in bottles and how to store water
When using tap water, although we very rarely use it for drinking, mainly only for washing dishes and laundry, but with the advent of various types of filters, this task has become easier, although everyone knows that when water is supplied from the city water supply, it This is how filtration takes place, where in addition to harmful substances, useful ones are also lost, but urbanization cannot exist any other way.
Otherwise, it is impossible to provide people with water in cities, through high filtration, through treatment plants, losing everything along the way. Despite any filtration, the water will still contain living substances, such as beneficial micro and macroelements, as well as bacteria and mycelium, which in normal composition preserve health and support the rhythm of life, but at a high rate of death.
I am more interested in collecting water from spring sources so that I always have clean and spring water at home. Although manufacturers of various containers recommend storing water in plastic bottles, it is not for nothing that earlier, for longer storage and disinfection of spring water, it was stored in earthenware containers. There, water can even be stored for up to 3 years without losing its beneficial properties!
When to use plastic bottles. It is recommended to pay attention to the marking of the production designation, PET (E) - polyethylene rephthalate
, is the designation that indicates the suitability of the container.
Those marked PVC
are considered toxic containers and are only suitable for storing chemicals.
Thus, having paid attention to the dishes, what brand they were and whether they were suitable for use, it was decided to look into their storage condition. Looking at my home plastic cylinders in which I store clean drinking water, I saw a green coating with a mold-colored tint along the edges in the folds and bends inside the container, and quickly decided to look for information on the Internet.
Here it became clear that this is true, due to the constant presence of containers in a humid environment and the lack of disinfection, a dark green coating - mold - forms around the ring-shaped bends, which is not bad. And now the task has become, how to wash a bottle with a narrow neck?
Before this, it didn’t really occur to me that dishes need to be cleaned not only for storing any liquids and not just rinsed with running water, but specifically to keep them clean all year round, also for drinking water, especially spring water. Here we will choose options for how to wash our eggplants.
Cleaning with salt and dishwashing detergent
Coarse salt and dish soap will help remove green residue from plastic dishes. To do this, you need to pour 4-5 tablespoons of coarse salt into the container (it will serve as an abrasive material) and add 3-4 tablespoons of detergent and shake the container in a circular motion so that the salt and detergent foam and begin the cleaning process. The stronger the agitation of the liquid, the faster and more effective the cleaning will be. If the deposit is strong, after shaking the container can be left to soak for an hour, and then repeat the centrifuge again. After cleaning, rinse the container with water.
Don't throw away: the second life of plastic containers
Millet
- Wear gloves to avoid burning your hands with nettles.
- Pick 1-2 mature plants.
- Coarsely chop the stems with a knife. The tops with leaves can be thrown away.
- Push the nettles into the bottle.
- Add 1 liter of cold water.
- Chat until cleansed.
Most people say: “I clean containers using special chemicals and have no problems,” but in fact they settle on the walls of the vessel and over time can lead to intoxication.
Rinse with pharmaceutical products
An inexpensive but effective antiseptic, which is found in any home medicine cabinet, can easily clean and disinfect plastic utensils. To treat a 20-liter container, you need to prepare the following solution: dilute 100 ml of hydrogen peroxide in 2 liters of water. Pour the resulting liquid into a container, close the lid and leave for 2-3 hours, during which time the hydrogen peroxide will react and dissolve algae, sediment and dirt. After the time has passed, you need to shake the bottle or canister several times and rinse with running water. If the plaque is very strong, then the procedure should be repeated again.
Removing green residue from a bottle
Plaque does not appear in glass bottles. And plastic ones are cleaned the same way as canisters. But due to the fact that the bottle is smaller in size, the following methods are most convenient:
- soda;
- salt (used similarly to soda);
- mustard (both grains and powder - the latter is often used by young mothers when cleaning baby bottles);
- peroxide and potassium permanganate.
A small bottle can also be cleaned well by a steam generator. The hose of the device is inserted into the neck, and after 2-3 minutes the coating is already behind the plastic - all that remains is to rinse.
Cleaning with cola and citric acid
Cola has long been known as an excellent cleaner and detergent, and in combination with citric acid it can clean even very old dirt, and most importantly - without any chemicals. In a plastic container with a volume of 20 liters, you need to pour 1.5–2 liters of carbonated drink and add 15–20 g of citric acid. In no case should you close the vessel, as during the reaction the cola will foam and gas will be released, which can rip off the lid. In addition, it is better not to hold the bottle in your hands and move away to a safe distance. After 10 minutes, the resulting liquid must be drained and the container rinsed.
It is not necessary to buy expensive detergents to wash plastic containers. It is enough to use folk remedies to quickly, cheaply, and most importantly, efficiently wash the container from green deposits and dirt.
How to dry the canister after cleaning
When time is not pressing, the container is simply turned over and placed on the neck so that the remaining water drains out. A large canister is unlikely to dry completely overnight, but it can easily dry out in 2 days.
And in conditions when you want to dry the container faster, they do this:
- Roll paper into a tube (newspapers, paper towels, office sheets are suitable). Place it inside the canister so that the end sticks out - then the package will be easier to get out.
- Place the container on the table upside down (on the neck).
- On one side, a coin or other flat object is placed under the neck. We need to make sure that air passes inside.
This method dries containers of any size in a few hours. The paper absorbs moisture, and the excess flows out of the throat.
Removing green stuff from a canister using household chemicals
You can also clean green water from a water canister using chemicals. But keep in mind that after using chemical cleaners, it is very important to thoroughly rinse the container. Particles of substances remaining on the walls can be harmful to health.
How and how to clean the canister:
- Cleaning powder with water. One way to use a greens canister is to fill it with non-powder, add water and shake well. If you repeat this process several times, the result will be excellent.
- Savo or sodium acid. This is a harsh chemical option. Pour cleaning agent or sodium acid into a container and mix with water. Shake, pour, rinse with clean water.
- Rice, boiling water and dish gel. An interesting way to wash a canister is to pour rice into it, pour boiling water over it, and add dish gel. Shake well, leave for a while, shake again. The walls of the product will become clean, the plaque will disappear. Do not use boiling water on plastic bottles!
Important! A good alternative to chemicals is regular baking powder. Pour it into a container, fill it with hot water, shake it, leave it for a few minutes, and rinse thoroughly.
Washing 19 liter bottles - instructions
As stated in the recipe, for removing mold inside glass and plastic bottles, a simple cleaning method was described and, as it turned out in the end, effective. A cleaning composition made from simple items that any housewife has in her kitchen. Taken:
Then all that remains is to thoroughly beat the mixture inside the container and shake it vigorously to get into all the areas where there were those same moldy shades inside the folds of the eggplant. I did these steps in the bathroom, since water still drips from the hole in the lid, otherwise it could be scattered all over the room.
I poured millet into the container; for those who don’t have millet, I think you can get by with other types of grains. The same wheat or rice grains for cleaning cylinders will probably help the same, if not better than millet, it’s worth a try! So, adding two teaspoons of baking soda, I poured warm water from the tap.
He went into the bathroom and began to carefully mix the composition inside the container, every now and then, trying to get into all the areas affected by mold. And to my surprise, from the very first movements, I saw how easily and without coercion the entire layer of a dark green hue, which was packed in all corners of the folds, was removed from the bottom of the container, from the place of bends and closer to the lid.
Thus, after working with one cylinder, rubbing it for 6 or 7 minutes, I poured the dirty composition into a plate to see what the composition had become. You can see how the green turbidity has completely come out from inside the cylinder. The millet is slightly stained in a dark color, having worked like sandpaper on the surface of the plastic wall.
The most incredible way to get my hair back!
This is just a DISASTER ! And after all, my hair did not start falling out in one day, but systematically - day after day I watched how the hair left my head: while combing, washing, even while sleeping. (read more…)
Here in the video you can see how easily mold is removed from the walls of the container.
So, at my house I always have three 19-liter cylinders in circulation, which are always ready in case of a trip somewhere in the countryside, for example, to collect spring water. We have a habit in our family, we drink a lot of water, starting with a glass every morning before breakfast, I’m glad that this has become a habit, most importantly a healthy one!
Now we will know and use mold-free and harmless water, since in its properties the solution with soda has a strong form of antifungal effect, after which no fungus or mold will want to develop in the treated surface.
I remember the method, even in apartments that we were preparing for sale (I was a realtor), using highly concentrated soda and hydrogen peroxide, we killed mold on the surfaces, black-green on the walls in the bathrooms. This solution works well!
After I finished the shaking procedure, I rinsed all the cylinders three more times with clean water, put them on the balcony to dry, turning them upside down so that excess water flowed out from the inside, and allowed a draft to ventilate inside the cylinder and dried it slightly.
How to clean green deposits from a plastic bottle
How can I clean a plastic bottle so that after treatment I can drink water from it? Regular dry beans will help get rid of plaque.
Expert opinion
Ekaterina Korneva, expert in the field of care, cleanliness and beauty
I will help you understand all the intricacies.
The same wheat or grains of rice for cleaning cylinders will probably help the same, if not better than millet, it’s worth a try. It should be poured into a container and filled with water, after which it should be shaken for ten minutes. How to clean a plastic canister of greens If you have any questions, please contact me, I will be happy to answer!
Video on the topic
Watch videos in which experienced specialists will tell you how to properly clean a plastic bottle from dirt:
Young mother, wife and part-time freelancer. Being a lawyer by training, I am accustomed to collecting and providing the most complete and reliable information. Constantly improves in the professional field and strives for personal growth and development.
Found a mistake? Select the text with the mouse and click:
Fresh lemon is not only suitable for tea: clean dirt from the surface of an acrylic bath by rubbing with half a cut citrus, or quickly wash the microwave by placing a container of water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt can simply be wiped off with a sponge.
Using newspapers
Suitable if the bottle is not very dirty and cleaning it does not require much effort. Take unwanted newspaper or thick paper, tear it and roll it into many small balls. Then put them in a container that needs to be washed and add water.
Shake the bottle and constantly turn it for 5 minutes. If the contamination is strong, then you should add soda, pouring it with water, thereby turning it into a thick porridge. Then add crumpled newspaper to the mixture and pour everything into the eggplant and shake again. After all these steps, the container should be washed well with water.
