Modern clothes are full of bright stickers and designs. The inscription on the T-shirt makes things unique and original. But there are difficulties with how to remove the sticker from clothing correctly. Over time, the designs crack, lose color, or simply become boring.
You should not throw away the item; there are many ways you can remove the emblem from clothing with your own hands. First you need to find out the type of fabric and sticker; most likely, this information can be found on the label. After that, choose the method that seems most suitable to you.
How to remove stickers with a hairdryer
Only in rare cases may special tools and materials be needed. Most often, you can cope with a task with what you have at hand. The thermal adhesive can be removed using a regular hair dryer. Its heating temperature is lower than that of an iron, but the result is no worse. Please read the clothing label first.
The method is as simple as possible, no buttons interfere with it: direct hot air directly to the print, bring the hairdryer as close to the clothes as possible. Within 10-15 minutes the sticker will begin to peel away from the item, carefully pry it off and remove it. Do this slowly so as not to accidentally damage the integrity of the drawing.
Tip : when heated, the glue melts and can stain the back and back of a T-shirt or sweater. To avoid such consequences, before removing the sticker from clothing, place an old thick rag inside the T-shirt.
Method 3. Cold
You can get rid of thermal stickers using the freezer. Cold promotes glue transformation. Due to exposure to low temperatures, the glue gradually dries out and begins to bond the pattern with the material worse. In order to remove the thermal sticker, just set the freezer to the lowest temperature. Then you should put the item in the middle for at least 30 minutes. After the glue has dried, you should carefully remove the drawing.
Removal with an iron
Another device that is found in every home can be used to update wardrobe items. Before removing the sticker with an iron, soak a towel in water, wring it out and place it wet on the design.
Place a hot iron on top. Once heated, the sticky base will begin to melt and can be scraped off with a knife. Sometimes the glue remains completely or partially on the surface of the fabric, but it can be removed with a special product or using other methods. They are described below.
Important : if the emblem is made of vinyl, then place a piece of parchment between the T-shirt and the towel, then when heated, the rubber design will be transferred to the paper.
Method 4. Scotch tape
Another effective method for dealing with a boring or faded pattern is the use of tape. Using this option will not be difficult to remove the sticker, but it is not recommended to use it on delicate fabric that can stretch. The process of dealing with a picture is that pieces of tape are placed one after another on the problem area, pressed tightly and abruptly torn off. This manipulation should be performed until the full result is achieved.
Removal with chemical solvents
The previous methods do not always work. Sometimes special tools are required. The compositions can be purchased at the store. Another option is to use alcohol, nail polish remover, or paint thinner. In any case, the method of application is the same.
Before removing the sticker from your T-shirt, test the product on an inconspicuous area. Then follow the instructions:
- It is necessary to turn the clothing inside out and heat the sticker on the back side with a hairdryer for two minutes.
- Soak a foam swab generously in solvent and apply to the sticker. Stretch the fabric slightly so that the product is well absorbed and damages the base.
- Now you can peel off the print without any problems; if you can’t peel it off, then repeat the procedure again.
Be sure to wash the item thoroughly so that the chemical composition does not get on your skin and cause an allergic reaction.
Method 5. Detergent
It is possible to remove the thermal sticker from a T-shirt using dishwashing gel. “Fairy” is considered the most effective. On dense fabrics, it is possible to use more aggressive dishwashing detergents, but their effect will have to be tested on an inconspicuous area.
To remove the glue, apply a generous amount of detergent to the design. Then the item should be left in this state for several hours. After the chemical is well absorbed into the sticker, the clothes should be thrown into the machine and washed thoroughly.
Advice! It is recommended to use a detergent to remove patterns when working with light or colored fabrics. This method is considered the most gentle, thanks to which you can delicately act on the fabric.
How to remove glue marks
The marks left after removing the print spoil the appearance of the clothing, but this is not a reason not to wear it. All you have to do is choose the glue removal method that suits your clothes and enjoy your favorite item again.
Alcohol-containing products
It is necessary to moisten the mark with alcohol or a solution that contains it several times, after which the glue will come off the clothing and can be easily removed. It is better not to use natural alcohol on colored items, as it may leave a stain. If a white streak appears, wash it off with dishwashing gel.
Special products from the store
The universal composition of Goo Gone removes glue by 100%. It is enough to apply it for a couple of minutes, and the remaining sticky base will be gone. For convenience, this product can be bought in a pen package and carried with you in case you need to get rid of stuck gum. Be prepared that the price of Goo Gone is quite high and the smell is quite unpleasant. After using it, clothes will need to be washed with fabric softener.
This is interesting : to save budget, housewives came up with a homemade replacement for Goo Gone. To prepare the pasta you will need: 2 tbsp. soda, 1 tbsp. coconut and a drop of orange oil. Mix all ingredients until a thick mass is formed and apply to the adhesive area. The result is no worse than from a purchased product.
Vegetable oil
This product is better for removing stickers from plastic products than from clothes, because grease stains from fabric are very difficult to remove. It is necessary to apply it to a sticker, which can be easily removed after 5 minutes.
Peanut butter
This product is excellent at destroying adhesives. Therefore, it is even used on clothes. Peanut oil is applied in a thin layer and literally after a minute the glue can be removed. At the end of the procedure, rub the oily stain with laundry soap and leave for 15 minutes, then wash the item. If the grease remains, you will have to repeat the treatment with a professional laundry stain remover.
Acetone
This product is best used on white items because it creates stains. Simply pour acetone onto the adhesive part and scrape off the residue with a knife. After the procedure, wash the item with powder to get rid of the unpleasant odor of the product.
Useful tips
If a chemical is used to remove the sticker, it is important to protect your hands (wear gloves) and follow safety precautions.
If after removing the sticker there are still greasy stains on the fabric, then before washing you need to apply dishwashing detergent to them.
It should be noted that modern methods of printing on fabric make it possible to create high-quality images that are resistant to temperature. Therefore, if it is not possible to display the drawing completely, then you can order another image on top of the old one, thereby updating the item.
How to fold a hoodie
How to make a mask from a T-shirt
Features of removal by type
There are several types of patterns, they are made from different materials, and therefore the removal methods will differ.
Iron-on adhesive
The fabric base can be made of satin, velvet, satin or flex. Jackets, T-shirts, jeans, shoes, and workwear are decorated with such prints. Easy to apply and just as easy to remove.
Before removing iron-on adhesives from clothing, check the label. Suitable for getting rid of annoying inscriptions: hair dryer, freezer, chemicals. Such thermal decorations do not leave marks on things.
Vinyl stickers
Loose labels are similar to thermal printing. It is best to remove them with an iron and paper; this is the most effective and fastest way. After removal, greasy stains remain, which can be easily removed with dish soap or a rag soaked in vinegar.
Thermal Stickers
This is an ordinary non-voluminous pattern that is transferred to clothing using an iron. This type of printing is only suitable for cotton fabric. Any clear alcohol is ideal for thermal printing. Before erasing the inscription from a T-shirt with alcohol, you can warm it up slightly with an iron. The paint will become soft and the solution will perform its function faster.
Marker or paint marks
Acetone or solvent is suitable for removing such prints. They remove paint and glue perfectly. Thermal printing cannot always be produced with high quality. If the item is light, there is a possibility that color stains will remain.
Rhinestones and sparkles
Rhinestones can be removed in absolutely any way. If you want to do it quickly, an iron will do, but there may be some glue left over. When time permits, use the freezer. A solvent will quickly cope with the task, but after it you need to wash the clothes.
If your blouse is decorated with glitter, you can get rid of it using tape or a special roller. All you have to do is lean the glitter against it and quickly tear it off. All the glitter will remain on the Velcro.
Silkscreen printing
If the clothing has a convex and dense print, it means it was made using silk-screen printing. The question of how to remove a design from a T-shirt of this format is very relevant, since this is quite difficult to do.
You can buy a spray to remove paint, apply it to the ornament and wash the item after 15 minutes. Even this method does not provide a guarantee, so it is better to make a patch or print over the design if you are tired of the previous image or have become damaged.
Batik
Batik is painting clothes with acrylic paints. Such a pattern can be drawn only in the first minutes after application. Batik does not come off the fabric. If the thing is damaged or tired of you, then it is better to say goodbye to it.
There are no hopeless situations; there are many ways to update clothes. Choose the step-by-step method you like, experiment and enjoy things that can serve you for some time. If any method is not clear, use the help in photo and video format.
How to remove a design from a T-shirt without harming the material?
Modern manufacturers have actively tried to ensure that the stickers are tightly glued to the T-shirt material. When there is a need to remove it, it is important to maintain the attractive appearance of the product. There are several ways to remove stickers:
- special means;
- iron;
- hairdryer;
- ferry;
- tape;
- cold treatment.
Noviny
On the eve of the New Year, the mineral water brand Borjomi is launching a new advertising campaign with the slogan “Live yourself with Borjomi.” The campaign kicks off the launch of the limited-edition Borjomi series. Its design reinforces the Christmas spirit, emphasizing the brand’s signature colors: Georgian Green and deep blue. The series is limited and the new design is already on sale
In the two months before the 2022 elections, the middle political parties of the Ternopil region spent six times more pennies on advertising in social networks, less than the entire river after the elections. How to connect data from the Facebook Advertising Library service.
Ukrainian director Evgeniy Golovatenko shot an advertisement in Kyiv for a new line of laptops from the Taiwanese brand Asus. The Ukrainian production studio 23/32 Films also joined the project. It is known that the filming process took place at a shipyard, in a wheat field near the city and in one of the pavilions of the capital.
