Carpet cleaning with Vanish products, review after testing


A clean carpet in the house is the key to the health and good mood of all its inhabitants.
Therefore, it is necessary to constantly clean carpets using special household chemicals. The Vanish line of cleaning products for the care of carpets and rugs is presented on the Russian market.

This article provides instructions for using Vanish for carpet cleaning: how to dilute and in what proportions, how to use.

Which one to choose: product description, consumer reviews

A properly selected product will help you deal with various stains on your own and will also keep your flooring clean and fresh for a long time.

When choosing a suitable product, you should focus on your own needs. Suitable for cleaning carpet from dirt and stains:

Vanish Gold shampoo for manual cleaning

Vanish Gold shampoo is designed to remove dirt and dust from large areas of carpet by hand.

Excellent for removing unpleasant odors, animal hair and hair . Maintains a fresh and clean appearance for a long time. Available in minimal dosage. Reviews of the application can be read here.

Moistened powder

Vanish moisturizing powder is intended for dry cleaning of coatings. Removes unpleasant odors well and gives the product a fresh look.

Reviews of the use of the product can be found here.

Stain remover spray Oxy

Carpet stain remover spray from Vanish is designed for local removal of stains from any carpet surfaces. The manufacturer of the brand product recommends using the spray immediately when a stain appears on the carpet .

You will find reviews about the use of the product here.

Active foam Gold

Active carpet cleaning foam from Vanish is designed to remove stubborn and difficult stains in frequently traveled areas (hallway, kitchen, stairwell, hallway).

Reviews can be found here.

For everyday cleaning, use liquid formulations or concentrates. They contain a minimal amount of chemicals and do not affect the structure of the carpet or its color.

To combat stains, a stain remover spray is used . Instructions for its use are given in detail on the packaging. If you follow its sequence, you can achieve good results, thereby avoiding going to the dry cleaner for a long time.

Negative reactions from people

Unfortunately, the spray and shampoo for cleaning upholstered furniture “Vanish” also has disapproving reviews. So, people write that this product is not capable of removing stains at all, it only masks them, making them lighter. But the manufacturer warns that Vanish spray or shampoo is best used when the stain is fresh. Also, housewives do not like the cost of this product, they say, for such a price you can buy several bottles of an inexpensive product for cleaning upholstered furniture, which means that it will last for a long time. But here, too, not everything is so simple. The fact is that Vanish spray and shampoo are used quite economically. Therefore, it is difficult to calculate what is more profitable to buy: a cheap drug, the consumption of which will be large, or a more expensive drug, the consumption of which will be insignificant. The choice is up to the housewives, but you should know one thing: Vanish spray or shampoo for cleaning upholstered furniture would not be so popular if there were no results, right?

Now you know the secret to keeping your furniture clean and fresh. With Vanish, your sofa or armchairs will “sparkle” in a new way, they will be renewed, the fabric will become richer and smell more pleasant. But in order to achieve this effect, it is necessary to get rid of stains in a timely manner and from time to time, and not once every 2 years, to completely clean the sofa and armchairs. It is also important to follow the instructions, which clearly indicate how much of the product needs to be diluted with water, how much to apply to the surface, etc.

What is needed besides the product itself?


Once the product has been chosen, you should think about the equipment without which it will be impossible to achieve good results.
What you will need:

  • plastic bucket 5 l;
  • soft foam sponge;
  • medium hard hand brush;
  • hygroscopic cloth to collect moisture;
  • household vacuum cleaner;
  • household gloves.

How to clean properly: method of use at home

Before you start cleaning the coating with any chosen Vanish product, you should remove all large and small objects from it. Then use a vacuum cleaner to collect debris and dust.

Cleaning with moistened Vanish powder:

  1. Shake the powder package vigorously to prepare it for use.
  2. Using a brush, apply a thin layer of powder over the entire surface.
  3. Leave for 30 minutes.

Removing stains with a spray:


  1. If the stain is fresh (spilled juice, tea, coffee, paint, etc.), first remove the liquid from the surface with a dry cloth or napkin.

  2. Using a spray bottle, apply the spray to the entire “affected” area of ​​the carpet.
  3. Using a brush, rub the product into the pile using smooth circular movements.
  4. Allow the product to absorb (no more than 5 minutes).
  5. Clean the treated area with a dry, clean cloth.
  6. If the stain is not removed the first time, repeat the stain removal process again.

Wet cleaning with Vanish Gold manual cleaning shampoo:

  1. Pour 0.9 liters of warm water into the container.
  2. Add 100 gr. Household product in a bucket of water, stir.
  3. Then beat the foam with a sponge (it is needed for further processing).
  4. Using a sponge, apply the foamy product in a circular motion over the entire surface or a separate dirty area.
  5. Leave the shampoo until completely dry (on average 2 hours).

Daily cleaning with Vanish Gold active foam:

  • Shake the foam canister.
  • Remove the cap and spray the product onto the carpet.
  • Use a sponge to spread the product over the entire pile using smooth circular movements.
  • Let dry.

Carpet finishing: Vacuum up any remaining cleaning product. If necessary, vacuum the surface again.

Using Vanish shampoo to remove stains on furniture

You can also use this stain remover in liquid form to clean a sofa or chair. To remove dirty imperfections on furniture, you need to do the following:

  1. Blot the freshly placed stain on the sofa with a clean, non-fading sponge to remove excess moisture.

  2. Apply Vanish shampoo for cleaning upholstered furniture using the cap from the bottle.
  3. Leave for 5-10 minutes.
  4. Blot and rub a little with a clean, damp cloth, which you then need to rinse and repeat the procedure.

For good results, treat stains on upholstered furniture with Vanish liquid shampoo immediately as soon as something spills on the sofa. But stubborn stains are much more difficult to remove.

What else do you need to know?

General recommendations for all types of Vanish products are as follows:


  1. Do not use cleaning products on handmade carpets.

  2. Before starting work, test the product on an invisible area of ​​the carpet. To do this, apply the product and wait a few minutes.

Rub a clean cloth over the treated surface; if the paint from the carpet has not migrated to the rag, then the product can be cleaned.

  • Carry out dry cleaning in a well-ventilated area.
  • Do not walk on the carpet while the product is active.
  • Dry the treated surface thoroughly.

Shampoo for wet carpet cleaning

This type of cleaning is more labor-intensive, but more effective. Depending on the task, one of three types of shampoos .

Based on reviews from housewives, we can conclude that most often they use Vanish for manual carpet cleaning.

To avoid mistakes, before work you should read the instructions for use. Improper use of the product can not only disappoint with the lack of effect, but also damage the carpet. Hence the negative reviews about the product.

Do not use shampoo on items with unstable color.

According to the manufacturer's instructions, the cleaning effect is provided not by liquid, but by shampoo foam.

Based on reviews, a list has been compiled on how to properly use Vanish shampoo.

Basic Rules:

  • Work in a well-ventilated area. Shampoo is a chemical, and you shouldn’t put your health in danger again;
  • Work with rubber gloves, do not allow liquid to get into your eyes;
  • Prepare a working solution. Pour one cap of Vanish into a carpet cleaning container and add 9 caps of water (according to the instructions, the ratio should be 1:9);
  • The water should not be too hot so that you can put your hands in it;
  • Using a foam sponge (the size of the sponge is selected individually), start whipping the foam. This is conveniently done by wetting and squeezing the sponge in your hand. Continue the procedure for several minutes until a thick, dense foam appears and the water is almost completely used up;
  • Then use a sponge to apply the foam to the carpet surface. There is no need to rub the foam in forcefully; just cover the carpet with it until a fluffy coating appears. On heavily contaminated areas, you can add a little liquid of the product, and after a while, use a sponge to make several deep circular movements;
  • Wait until the foam settles and the carpet dries. Then remove the remaining product with a regular vacuum cleaner;
  • To completely remove the cleaner, wipe the carpet surface with a damp brush;
  • After finishing the work, the carpet must be completely dried to avoid mold. According to the instructions, you can use the carpet 2-3 hours after cleaning;
  • If the effect is not achieved, cleaning must be repeated.

What to do if the remedy did not help?

Judging by customer reviews, Vanish for carpets has not helped everyone. And this is not surprising, because sometimes even professional dry cleaning cannot cope with stains that they have already tried to remove on their own.

Cleaning industry experts do not recommend starting cleaning yourself if:

  • old stains and unknown location;
  • there are old and heavily greasy places;
  • There are places where pets constantly defecate.
  • Top 3 analogues: how to use them, what is the price?

    Vanish remains the undoubted leader in the household products market. But besides this manufacturer, there are a large number of alternative products in different price categories .

    Shampoo 5+

    A leading product in its category. The product of a domestic manufacturer is used both concentrated and diluted. Cost: 120 rubles per 500 ml.

    Consumers highlighted the following positive characteristics:

    • easily dissolves;
    • effectively removes unpleasant odors;
    • easily copes with dust and dirt;
    • has antistatic properties;
    • Can be used in washing vacuum cleaners.

    An affordable option that will not only save your budget, but will also perfectly remove difficult stains. Used as a stain remover: applied to the contaminated area, washed off with water using a foam sponge. Cost 75 rubles per 500 ml.

    Product advantages:

    • Available in aerosol form;
    • eliminates difficult stains;
    • copes well with odors.

    Minuses:

    • acrid odor;
    • Not suitable for general cleaning, only as a stain remover.

    Amway Cleaner

    Concentrated cleaner from Amway is an environmentally friendly product that can easily clean any floor coverings and upholstery fabrics. Cost from 600 rubles per 1 liter.

    Pros:

    • quality meets European standards;
    • effective in combating stubborn stains and various odors;
    • Suitable for all types of carpets.

    Cons: high cost.

    Tips for caring for carpets

    With proper and regular care of any carpet, its service life can be significantly increased.

    To do this you need to follow the rules:

    1. At least 2 times a week, vacuum up dust and small particles of dirt.
    2. Do not allow walking on carpeted surfaces in outdoor shoes.
    3. After washing the floors, let them dry then lay carpets and rugs.
    4. Periodically lift the floor covering and remove dust underneath it.
    5. Place rubber circles under furniture legs, if they are on carpet, to prevent dents.
    6. Any defects (holes, unraveling of weaving) should be immediately restored, darned, and sealed with suitable material.
    7. When wet cleaning, do not use water above 40 degrees, otherwise you can damage the pile and disrupt the structure of the material.
    8. Do not rub against the lint with brushes or rags.
    9. Do not use hard brushes for dry carpet cleaning.
    10. Remove spilled liquid and fresh dirt immediately, preventing them from penetrating deep into the pile.
    11. Before using any detergent or cleaning product, test it on an invisible area first.

    What to remember

    1. Don't expect a magical result . Only with periodic cleaning can an ideal result be achieved.
    2. The product is not intended to remove difficult stains . It fights common stains.
    3. Constantly foam the liquid . Foam and ensures effective cleaning of the pile.

    Video: how to clean a carpet at home. Carpet cleaner – Vanish

    The main point of carpet cleaning is pre-treatment. Be sure to remove large debris from the floor and vacuum the carpet thoroughly. To prevent the coating from absorbing dust during treatment, wash the floor under the carpet.

    If the product is painted with bright colors, try Vanish on an inconspicuous area. If the paint has not washed out or faded, treatment can be carried out.

    Also, during treatment, open the windows and take children and animals out of the room so that they do not inhale the vapors of the substance.

    How to use Vanish for carpets

    In order for the treatment result to please you, it is extremely important to follow the instructions and dosage of the substance. Each of the Vanish products is diluted differently.

    Shampoo

    Vanish shampoo actively acts on old dirt and stains, while at the same time giving the carpet brightness and richness of colors. There are two types of shampoo on sale: classic and antibacterial with additional components. The method of breeding them is identical.

    The procedure involves applying foam to the surface for a certain time. To get the desired consistency of foam, mix 1 part shampoo with 9 parts water. Shake the liquid thoroughly until a strong foam forms and apply to the surface.

    Advantages of cleaning upholstered furniture with Vanish cleaner

    1. Absolute safety after cleaning sofas and armchairs, since the product used does not contain chlorine, and its components are harmless to the fabric, they do not destroy its structure.
    2. Convenience and ease of use.
    3. Safety for people. The “Vanish” product for cleaning upholstered furniture does not harm human health.
    4. Normal value for money.

    How to use Vanish for carpets: choosing a cleaning method

    Before you start treating the carpet, decide on the cleaning method. He can be:

    Each processing method has its own rules and nuances.

    Manual wet carpet cleaning Vanish

    Vanish shampoo is suitable for manual cleaning. The procedure will take at least 1–2 hours. To process, you will need a bowl of water, a soft brush or sponge, and a vacuum cleaner.

    1. Prepare the coating by removing debris and dust from the surface.
    2. When indoors, open the windows and put on gloves.
    3. Pour water into a basin and add the required amount of product based on the proportions indicated in the instructions.
    4. Shake the liquid thoroughly until a strong foam forms.
    5. Apply the foam to the carpet pile.
    6. During application, make sure that the coating is not excessively wet and that the foam does not settle. If necessary, whip the foam again.
    7. Rub the foam with a brush into heavily soiled areas.
    8. Wait for it to dry completely. This usually takes from 1 to 2 hours.
    9. Carefully remove any remaining foam with a vacuum cleaner.

    It is noted that such treatment perfectly cleans carpets of dirt, adds brightness to colors and completely eliminates unpleasant odors.

    Dry cleaning

    This method is suitable for dry cleaning carpets using Vanish powder. For the procedure, you only need a vacuum cleaner.

    1. Prepare the surface by thoroughly cleaning the carpet from debris and dust.
    2. Shake the powder package to evenly distribute the granules inside.
    3. Open the package with the substance and carefully sprinkle it on the carpet.
    4. Leave Vanish on the surface for 20-30 minutes.
    5. Vacuum the surface thoroughly, removing all product granules from the surface.

    How to Vanish clean a carpet without a vacuum cleaner

    If you don't have a vacuum cleaner at hand, it doesn't matter. You can clean a carpet with Vanish without it, but in this case the procedure will take several times longer.

    Carpet shampoo is best for cleaning as the powder is very difficult to remove by hand.

    The scheme for preparing the coating, diluting and applying the product remains the same. At the last stage, after the foam has dried, arm yourself with a sponge and carefully collect its remains.

    How to use Vanish for washing vacuum cleaners

    Vanish special shampoo for washing vacuum cleaners does an excellent job of cleaning the carpet, almost without your participation. Please note that you cannot put other products into the vacuum cleaner.

    Such cleaning will only help to refresh the coating and remove minor dirt. For stubborn stains, it is still better to use manual foam treatment.

    1. Prepare the carpet.
    2. Open the windows indoors.
    3. Dilute 1.5 scoops of shampoo in 1 liter of water.
    4. Pour the resulting solution into the vacuum cleaner tank.
    5. Vacuum the carpet thoroughly.
    6. Wait until the surface is completely dry.
    7. Vacuum the surface again, but without using Vanish.

    How to clean a car carpet with Vanish

    To clean the carpet in a car, any Vanish for cleaning carpets is suitable. Vanish shampoo is considered the best remedy. The process of cleaning carpet in a car is absolutely identical to cleaning carpet in an apartment. For convenience, remove the carpet from the interior, then vacuum and carry out the dirt removal procedure. At the last stage, vacuum again and put the cover back in place.

    Most car enthusiasts note that after cleaning with Vanish, the carpet not only became clean, but also acquired a pleasant smell.

    How to clean a long pile carpet with Vanish

    Any cleaning agent penetrates deeper into the long fibers of carpets. To make the process of removing residual substances as simple as possible, use Vanish spray for cleaning. It does not penetrate into the pile as much as powder or foam.

    Dry cleaning powder

    “Vanish” for carpets in the form of a moistened powder is convenient for cleaning large items and copes well even with some types of stains. The product applied to the carpet surface draws out dirt from the depths of the pile, after which it is easily removed with a vacuum cleaner. Attention: the vacuum cleaner must be a regular one, preferably with a replaceable disposable dust collector. Do not use a washing vacuum cleaner to remove powder from the carpet!

    How to use Vanish for cleaning carpets in powder form:

    1. Remove dust and debris from the carpet using a vacuum cleaner.
    2. Without opening the package, shake the powder as indicated on the package instructions.
    3. Using a soft bristle brush, apply the powder to the carpet and wait until it dries (waiting time - up to 30 minutes).
    4. Use a vacuum cleaner to remove the powder from the carpet; this may require vacuuming the product several times.

    As you can see, the Vanish series provides various options for all types of carpets that do not require delicate handling. Read the instructions carefully and carry out all actions in accordance with them, and your carpet will delight you with cleanliness and attractiveness for a long time. If this product does not help or is simply not suitable for your carpet product, our specialists are always ready to advise you online or in our showroom in Moscow.

    What to do if the remedy did not help?

    If you are unable to remove the stain, try repeating the procedure. First, apply a little undiluted Vanish to the contaminated area and only then distribute the foam. The double action of the substance will certainly eliminate the trace.

    To avoid facing a similar problem in the future, try not to allow the stains to become ingrained. Use Vanish immediately after contamination appears on the surface.

    Only professional dry cleaning can handle the most stubborn stains. Unfortunately, it was noticed that if they tried to remove the stain with Vanish, but it did not help, the stain is more difficult to remove, since it is already attached to the fibers.

    Vanish for carpet cleaning is available in 4 formulas: shampoo, powder, spray and detergent for vacuum cleaners. Each product copes well with various types of contaminants, removes harmful bacteria from the surface, and eliminates odors. When using any of the products, the main thing is to follow the rules for preparing the product, dosage and application of the substance, and also not to neglect safety precautions.

    «>

    special instructions

    1. This household chemical product should be hidden from the prying eyes of children. If the child does take out the bottle and accidentally splashes its contents into his eyes, then the mother should immediately rinse them with water.
    2. Do not mix Vanish spray for cleaning upholstered furniture with any chemicals.
    3. When working with this product, you must wear gloves.
    4. Vanish spray should be stored in an upright position in a cool place. The shelf life of this product is 2 years.
    Rating
    ( 1 rating, average 4 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]